Overview
The Bestop ZipRail Soft Zip Tonneau Cover, part number 18206-01, is a roll-up soft tonneau cover for the 2000–2005 Chevrolet Silverado 1500 and the 2000–2005 GMC Sierra 1500. It attaches to the truck bed with a seal and peel system that needs no drilling, and installation takes 30 minutes.
The fabric is vinyl coated polyester. Quick release tabs let you open and close the cover.
Key features
- Vinyl coated polyester fabric
- Seal and peel attachment system for the truck bed
- No-drill installation, which Bestop puts at 30 minutes
- Quick release tabs for opening and closing
- Roll-up design with manual operation
Seal and peel care
A seal and peel attachment depends on clean, dry bed surfaces to hold its grip. Before setting the strips, wipe the bed rail contact areas and let them dry. Press each strip down firmly so the seal forms along its full length, and check the seal during the first days of use.
Peeling and re-sealing can weaken the adhesive over time, so inspect the strips whenever the cover is removed for cleaning. Look for lifting edges, dirt under the seal or fabric pulling away from the bed. Addressing these early helps keep water from getting between the cover and the bed.
- Clean contact areas with mild soap
- Press strips down along their full length
- Inspect for lifting edges
- Replace worn strips rather than forcing a seal
Specifications
| Brand | Bestop |
|---|---|
| Part number | 18206-01 |
| Material | Vinyl coated polyester fabric, soft |
| Tonneau type | Roll-up |
| Attachment | Seal and peel, no drilling |
| Installation time | 30 minutes |
| Operation | Manual |
| Fitment type | Direct fit |
| Rack included | No, rack not included |
| Rack compatible | No |
| Toolbox included | No, toolbox not included |
| Toolbox compatible | No |
Vehicle fitment
It fits the 2000–2005 Chevrolet Silverado 1500 in Base, LS and LT trims, and the 2000–2005 GMC Sierra 1500 in Base, HT, SL, SLE, SLT and WT trims.
Silverado and Sierra model years after 2005 and the 2500 and 3500 heavy-duty trucks are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bestop’s 30 minute figure applies to the seal and peel attachment. Press the seal and peel strips down firmly and confirm the cover is tight along the rails before use.
What’s included
The contents include the cover and its seal and peel attachment. Check the package contents before installing.
Not included: a rack and a toolbox, which the cover is not compatible with.














