Select your vehicle

Bestop EZRoll Soft Tonneau Cover – 19224-01

Bestop

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2019–2021 Chevrolet Silverado 1500 and GMC Sierra 1500 pickups
  • Bestop EZRoll soft roll-up tonneau cover, part number BST19224-01
  • No-drill bolt-on clamp system with 3M-brand self-adhesive strips
  • Dual pull tabs at the rear corners for manual roll-up operation
  • Rack and toolbox not included, and not compatible with either

Description

Overview

The Bestop EZRoll Soft Tonneau Cover, part number BST19224-01, is a soft roll-up tonneau cover for pickup truck beds. It fits the 2019–2021 Chevrolet Silverado 1500 and 2019–2021 GMC Sierra 1500. It mounts without drilling using a bolt-on clamp system that attaches to the bed rails, and its low-profile design is sleek in appearance.

The EZRoll is designed to work in any climate or weather condition, with ease of installation and everyday use built into the design. 3M-brand self-adhesive strips add grip, and dual pull tabs at either rear corner let you roll the cover up by hand for full bed access. It is a manual cover with no powered operation.

Key features

  • No-drill, bolt-on clamp system that attaches to the bed rails
  • 3M-brand self-adhesive strips for grip and durability
  • Dual pull tabs at either rear corner for roll-up operation
  • Low-profile look, which Bestop describes as sleek
  • Soft roll-up design with manual operation and direct fit

Clamp-mounted tonneau basics

Clamp-mounted tonneau covers hold the cover by pressure on the bed rails rather than through drilled holes. That keeps the bed intact and makes removal simpler, but the clamps and adhesive need regular attention to stay secure on rough roads and in heavy rain.

Adhesive strips work best on clean, dry surfaces. Wipe the rail and strip area before pressing the strips down, and let them set before loading the bed. If a strip starts to lift, clean it and reapply rather than forcing it, since dirt under the strip reduces grip.

Because the cover rolls by hand, check that the pull tabs and rolling mechanism move freely. Keep the tabs clean and dry, and avoid loading the bed beyond what the cover is meant to hold when rolled. Inspect the clamps periodically, especially after trailer or off-road use.

  • Clean the rails before attaching clamps
  • Press adhesive strips down firmly and let them set
  • Recheck clamp tension after the first drives

Specifications

Brand Bestop
Part number BST19224-01
Tonneau type Roll-up
Material Soft
Operation Manual
Fitment type Direct fit
Attachment Bolt-on clamp system to the bed rails with 3M-brand self-adhesive strips, no drilling
Rack included No, rack not included
Rack compatible No
Toolbox included No, toolbox not included
Toolbox compatible No

Vehicle fitment

It fits the 2019–2021 Chevrolet Silverado 1500 in Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV and WT trims, and the 2019–2021 GMC Sierra 1500 in AT4, Base, Denali, Elevation, SLE and SLT trims.

Other model years and heavy-duty 2500 and 3500 trucks are not in this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the cover relies on bed-rail clamps and adhesive strips rather than drilled mounts, check that every clamp is fully tight and the strips are firmly pressed down before loading the bed.

What’s included

Make sure the box holds every part your installation needs before starting. The rack and toolbox are not part of this cover.

Not included: a rack and a toolbox. The cover is not compatible with either one.

SKU: BST19224-01 Categories: ,

Fitment

VehicleYearsTrims
Chevrolet Silverado 15002019–2021Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV, WT
GMC Sierra 15002019–2021AT4, Base, Denali, Elevation, SLE, SLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Bestop EZRoll BST19224-01 fit a 2019 to 2021 Silverado 1500?

Yes. It fits the 2019–2021 Chevrolet Silverado 1500 in Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV and WT trims. Match your year, model and trim to the coverage before you buy.

Does the EZRoll need holes drilled in the truck bed?

No. The cover uses a no-drill, bolt-on clamp system that attaches to the bed rails, with 3M-brand self-adhesive strips added for grip. Check that every clamp is tight before loading the bed.

Does this tonneau cover include a rack or toolbox?

No. The rack and toolbox are not included, and the cover is not rack compatible or toolbox compatible. Confirm your rack and toolbox needs before buying.

How is the EZRoll opened and closed?

It is a manual roll-up cover. Dual pull tabs at either rear corner let you roll it up by hand to reach the full bed.

What should I do if a clamp loosens on the road?

Pull over somewhere safe and check the clamp, tightening it evenly across the rail. Inspect the cover and adhesive strips for shifting, then recheck the clamps after driving a short distance. Frequent loosening suggests the clamp or rail surface needs cleaning.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon