Overview
The Bestop EZFold is a soft folding tonneau cover for the 2020–2026 Jeep Gladiator, part number BST16280-17. It uses leather grain textured vinyl fabric, with strong aluminum bows that span across the side rails for support, and it folds compactly.
The fabric is stretch and shrink resistant, and reinforced corners add strength and stability. A lower profile hinge and rail design lets the cover fold up small, and integrated buckle straps hold the folded cover to the cab rail. Installation works in any climate or extreme weather.
Key features
- Strong aluminum bows span across the side rails for support.
- Leather grain textured vinyl fabric that Bestop describes as stretch and shrink resistant.
- Reinforced corner construction for added strength and stability.
- Lower profile hinge and rail designs allow the cover to fold compactly.
- Integrated buckle straps secure the folded cover to the cab rail.
- Manual operation.
Folding covers and daily use
A folding tonneau cover stacks in sections toward the front of the bed, which leaves the rear open for cargo or a tailgate. The aluminum bows hold the cover shape and carry it across the bed, so they should be kept free of debris that can scratch the fabric or pinch it when folding.
Hinges and rail channels take the most wear on folding covers. Check the hinge pivots and rail fasteners periodically, and keep grit out of the channels, since sand can grind on the fabric. Tighten any loose buckle straps before driving so the folded cover stays against the cab.
Before choosing a folding cover, think about the bed length you use and whether you need a tailgate to clear the folded stack. A lighter cover is easier to fold by hand, but the fabric and bows should still suit the speeds and weather you drive in.
- Keep rail channels clear of sand and grit
- Check buckle straps before each trip
- Inspect bows for bends after rough off-road use
Specifications
| Brand | Bestop |
|---|---|
| Part number | BST16280-17 |
| Tonneau type | Folding, soft |
| Material | Leather grain textured vinyl |
| Bows | Aluminum, span across side rails |
| Operation | Manual |
| Rack included | No |
| Toolbox included | No |
| Rack compatible | No |
| Toolbox compatible | No |
| Installation time | About 30 minutes |
| Fitment | Direct Fit |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator in these trims: 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport.
Not on the list: Jeep Wrangler models and Gladiator model years outside 2020–2026. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation takes about 30 minutes. The cover is not rack compatible or toolbox compatible, so plan to use it without either.
What’s included
The cover does not include a rack or toolbox. Make sure the box holds every part your installation needs before starting.
Not included: Rack and toolbox.












