Overview
The Rugged Ridge Armis Retractable Locking Bed Cover, part RUG13550.31, is a hard retractable bed cover for the 2020–2026 Jeep Gladiator (JT). It has a vinyl-over-aluminum design and is made in the USA.
The Armis pairs the convenience of a fully retractable cover with a finish closer to a traditional soft cover. Its hard construction is designed to keep cargo secure in any weather while the bed stays easy to reach.
To open it, you unlock the cover and slide it toward the cab. The cover then retracts into its own compact canister and can be held in several positions to make loading and unloading easier. It can be opened, closed or locked without touching the tailgate.
Key features
- Fully retractable operation with manual control
- Vinyl-over-aluminum construction for strength and stable operation
- Retracts into a compact canister
- Can be secured in multiple positions for loading or unloading
- Opens, closes and locks without touching the tailgate
- A version is made for Gladiators with or without the Trail Rail system.
- Comes with a tailgate extrusion delete kit pre-installed
Choosing a retractable cover
A retractable cover moves on a track and canister, so the track and its mounts carry the load every time the cover opens. Before using it heavily, check that the mounting hardware sits square and that the cover slides without catching. Loose or bent track pieces can make the cover hard to operate and cause it to bind partway through travel.
Retractable covers work best when the bed is kept clear of tall loads near the rails. A cargo strap or tie-down that hangs over the edge can snag the cover as it moves. Keep the rail channels clean, and wipe grit off the panel edges so the seal stays effective.
- Track alignment and fastener torque
- Smooth slide along the full travel
- Rail channel free of debris
- Seal contact at the cab and tailgate edges
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | RUG13550.31 |
| Product type | Retractable locking bed cover |
| Material | Hard, vinyl-over-aluminum design |
| Tonneau type | Retractable |
| Operation | Manual |
| Rack included | No |
| Rack compatible | No |
| Toolbox included | No |
| Toolbox compatible | No |
| Made in | USA |
| Warranty | Limited 5-year |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator in the Launch Edition, Overland, Rubicon, Sport and Sport S trims.
Wrangler and other Jeep models are not part of this listed fitment, and Gladiator years outside 2020–2026 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The tailgate extrusion delete kit comes pre-installed on the cover, and no separate tailgate extrusion part is offered. Check your truck’s Trail Rail setup before fitting the cover, since the Armis is made for both setups.
What’s included
The cover includes a pre-installed tailgate extrusion delete kit. The rack and toolbox are not included.









