Overview
The BedRug Impact Mat IMC07SBS is a TPO-topped truck bed mat for 2007-2019 Chevrolet Silverado and GMC Sierra pickups, with a 3/4 inch padded underlayer. It is intended for beds with a spray-in liner or no liner, and it fills the ribs and contours of the bed to create a smooth, void free loading floor.
A built-in tailgate gap guard hinge joins the bed mat to the tailgate section, covering the seam where debris usually collects. The flat, slip and skid resistant top resists fading and UV exposure, and the cushioned underside is meant to ease kneeling while working in the bed.
Key features
- Flat TPO composite top that is slip and skid resistant
- 3/4 inch padded under layer for dent and impact resistance
- Cushioned and knee friendly for crawling around the bed
- Integrated tailgate gap guard hinge that spans the bed and tailgate
- Bleach, battery acid, oil and gas wash right off
- Does not absorb water; water drains through the zippered perimeter and factory drain holes
Tailgate seams and drainage
The gap between a truck bed and its tailgate is a common place for debris, water and dirt to collect. A tailgate gap guard hinge covers that seam, which keeps material out of the space and helps the mat lie flat at the rear edge. Over time, a neglected seam can trap moisture that works into the bed floor.
When choosing a mat for a heavy-duty or work truck, think about how often you use the tailgate. Frequent loading puts stress on the hinge area, so inspect it after rough trips. Make sure the drain path stays open, since a zippered perimeter only works when the factory drain holes are free of mud. If you carry long items, check that they do not press on the hinge section.
- Check the hinge seam after loading long items
- Clear drain holes before rainy trips
- Look for uneven edges at the tailgate
Specifications
| Brand | BedRug |
|---|---|
| Part number | IMC07SBS |
| UPC | 870558005938 |
| Top surface | TPO composite |
| Under layer | 3/4 inch padded foam |
| Edge | Zippered perimeter |
| Mounting | Hook and loop fasteners |
| Drying time | As little as 20 minutes |
Vehicle fitment
Based on BedRug’s manufacturer fitment list, this part number covers:
- 2007-2018 Chevrolet Silverado 1500 (Custom, High Country, LS, LT, LTZ, SSV, WT)
- 2007-2019 Chevrolet Silverado 2500 HD (High Country, LT, LTZ, WT)
- 2014-2019 Chevrolet Silverado 3500 HD (High Country, LT, LTZ, WT)
- 2007-2018 GMC Sierra 1500 (Base, Denali, SL, SLE, SLT, WT)
- 2007-2019 GMC Sierra 2500 HD (Base, Denali, SLE, SLT, WT)
- 2011-2019 GMC Sierra 3500 HD (Base, Denali, SLE, SLT, WT)
Not covered: Silverado and Sierra 1500 model years from 2019 onward, and Chevrolet or GMC models that are not on this list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The underside uses hook and loop fasteners, so no drilling, sanding or bed prep is needed. Once installed, check that the hinge sits over the tailgate gap and that the mat lies flat across the bed ribs.
What’s included
The mat is the only item included.







