Overview
The BedRug Impact Mat IMQ17SBS is built for the 2017–2019 Ford F-250 Super Duty and F-350 Super Duty. It is made for trucks with a spray-in bed liner or no liner, and it lays over the bed floor to make a flat, cushioned surface that grips rather than slides. It is made to fit a specific make and model, following the ribs and contours of the bed so the loading area stays even.
A 3/4-inch padded layer sits beneath a TPO composite top, absorbing dents and impacts while cushioning knees during work in the bed. A tailgate gap guard hinge runs across the seam between the bed and the tailgate, which keeps debris from collecting there. Hook and loop fasteners secure the mat, so there is no sanding, prepping or drilling into the bed.
Key features
- Flat TPO composite top that is slip and skid resistant
- 3/4-inch padded layer beneath the top for dents and impacts
- Knee-friendly cushioning for crawling inside the bed
- Integrated tailgate gap guard hinge
- Bleach, battery acid and gas wash right off
- Designed for exterior use; the material does not absorb water
- Water exits through the zippered perimeter and the factory bed drain holes, drying in as little as 20 minutes
- The TPO top resists fading and UV exposure.
Fit, drainage and care
Super Duty beds get heavy use on job sites, so a bed mat that protects the floor is often the first accessory owners add. A padded top makes it easier to reach into the bed without pressing on hard metal, and the flat surface keeps tools and materials from rolling. Owners who haul loose material should consider how the mat sits against the bed walls, since debris that works under the edges can scratch the paint.
Water management matters as much as padding. The mat is built to let water drain through its perimeter and out the factory drain holes, so those holes should stay clear of dirt and mud. Check them after washing the truck. Keep an eye on the tailgate seam too, because a hinge that covers the gap works best when the mat is seated flat and the edges are free of grit.
- Keep factory drain holes free of debris
- Set the mat in place before loading heavy gear
- Wipe the bed floor before fastening
- Inspect the strips after rough trips
Specifications
| Brand | BedRug |
|---|---|
| Part number | IMQ17SBS |
| UPC | 870558005976 |
| Top layer | TPO composite |
| Under layer | 3/4-inch padded foam |
| Attachment | Hook and loop fasteners |
| Surface | Flat, slip and skid resistant |
| Drying time | As little as 20 minutes |
Vehicle fitment
It fits the 2017–2019 Ford F-250 Super Duty and F-350 Super Duty in King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
F-150 pickups and Super Duty model years outside 2017–2019 are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Hook and loop fasteners install the mat without drilling, sanding or priming the bed. The factory bed drain holes are part of the water path the mat is designed around, so keep them in the bed as the truck came from the factory.
What’s included
Only the fitted mat is named for this part number, with hook and loop fasteners as the attachment. No other items are mentioned.







