Overview
The BedRug XLT Mat, part number XLTBMT02LBS, is a custom-fit truck bed mat for Dodge and Ram 1500, 2500 and 3500 trucks across several model years. It is made for trucks with an existing spray-in liner or no bed liner.
The top layer is 100% polypropylene, giving a flat, slip and skid resistant surface over a 3/4 inch padded under layer. The integrated tailgate gap guard hinge joins the bed piece to the tailgate piece and covers the gap, which keeps debris from building up. The mat installs in minutes with hook and loop fasteners, with no sanding, prepping or drilling. The material is fade and UV resistant, does not absorb water, resists mold and mildew, and dries in as little as 20 minutes.
Key features
- Made for trucks with an existing spray-in liner or no bed liner
- Top layer of 100% polypropylene, slip and skid resistant, flat surface
- 3/4 inch padded under layer for dent and impact resistance and knee comfort
- Integrated tailgate gap guard hinge
- Installs in minutes with hook and loop fasteners; no drilling
- Fade and UV resistant; does not absorb water
- Custom fit for each truck, filling the ribs and contours of the bed
Keeping the bed mat in place
A custom-fit bed mat sits on the bed floor and fills the ribs and contours, so it stays put better than a loose mat. Hook and loop fasteners hold it in place, but they lose grip if dust or moisture builds up underneath. Pull the mat periodically, clean both faces, and let the mounting surfaces dry before setting it back down.
Owners who haul wet or muddy loads benefit from a mat that does not absorb water, since moisture stays on the surface and can be wiped off. Check the tailgate hinge after rough use for debris lodged in the gap. If the mat is used alongside a spray-in liner, make sure the liner is fully cured before installing the mat.
- Clean hook and loop strips with a stiff brush
- Dry the bed floor before reinstalling the mat
- Check the tailgate gap guard after each trip
- Replace fasteners that have lost grip
Specifications
| Brand | BedRug |
|---|---|
| Part number | XLTBMT02LBS |
| UPC | 870558005884 |
| Product type | XLT truck bed mat |
| Top layer | 100% polypropylene |
| Under layer | 3/4 inch padded foam |
| Surface | Flat, slip and skid resistant |
| Tailgate | Integrated tailgate gap guard hinge |
| Installation | Hook and loop fasteners; no drilling or sanding |
| Resistance | Fade, UV, mold and mildew resistant; does not absorb water |
| Fit type | Direct fit, custom for each truck |
Vehicle fitment
Dodge Ram 1500 (2002-2003 and 2009-2010 in Laramie, SLT, ST, TRX, TRX4), Dodge Ram 2500 (2002 Base), Dodge Ram 3500 (2002 and 2006 in Base, Laramie, ST), Ram 1500 (2011-2018 and 2019 Classic), and Ram 2500 and 3500 (2011-2018, several trims).
The mat is not made for other Ram years outside those listed, or for other truck brands. Confirm your bed length, and your vehicle’s year, model and trim, before ordering.
Installation notes
Clean and dry the mounting surfaces before installing, and test-fit the part before final tightening. Follow the installation order in the instructions, tighten fasteners to the specified torque, and re-check them after the first few miles of driving. Prepare and paint the part before final installation if it will be painted.
What’s included
A bed piece with an integrated tailgate piece and hook and loop fasteners.




