Overview
The BedRug Impact Mat IMC07LBS is a padded truck bed mat for pickups with a spray-in bed liner or no liner at all. It lays over the bed floor and fills in the ribs and contours, giving a flat, slip resistant surface for loading gear and kneeling. It is made to fit a specific make and model, so match the year range to your truck before ordering.
The mat uses a TPO composite top layer over a padded under layer. It fastens with hook and loop strips, so the bed is not sanded, prepped or drilled. A tailgate gap guard hinge joins the bed section to the tailgate section and covers the seam, keeping debris from building up between them. The mat holds up to materials from mulch to bleach.
Key features
- Flat TPO composite top surface that is slip and skid resistant
- Padded under layer, 3/4 inch thick, for dent and impact resistance and knee comfort
- Integrated tailgate gap guard hinge covering the bed-to-tailgate seam
- Hook and loop fasteners for installation in minutes
- Bleach, battery acid, oil and gas wash right off the surface
- Will not absorb water; water runs off through the zippered perimeter and factory bed drain holes
- Fade and UV resistant TPO material
Matching the mat to your truck
Because this mat is made for one specific make and model, the most important step is matching it to your truck before anything else. Start with the year, cab and bed length printed on the registration or door sticker, then compare them with the vehicle you own. A mat that does not match the bed will not sit flat or seal the seam at the tailgate.
Once the fit is confirmed, lay the mat in and press the edges into the ribs so it sits without gaps. Hook and loop strips work best on a clean floor, so clear out grit and loose debris first. Over time, check the strips and the tailgate hinge for wear, and replace any that no longer hold the mat in place.
- Match year, cab and bed length to your truck
- Clean the bed floor before fastening
- Check hook and loop strips every few months
- Keep the tailgate seam free of debris
Specifications
| Brand | BedRug |
|---|---|
| Part number | IMC07LBS |
| UPC | 870558005921 |
| Top layer | TPO composite |
| Under layer | Padded, 3/4 inch thick |
| Attachment | Hook and loop fasteners |
| Water absorption | None |
| Drying time | As little as 20 minutes after water exposure |
Vehicle fitment
The mat is made for one specific make and model, so fit depends on matching the exact truck. Confirm fit for your vehicle’s year, model and trim before ordering.
Because no model years are stated, do not assume it fits your truck from the name alone. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It attaches with hook and loop fasteners and installs in minutes with no sanding, prepping or drilling into the bed. Fit is make and model specific, so check the year range against your truck before starting the install.
What’s included
The mat and its hook and loop fastening system make up the package.






