Overview
The Baer Brakes 4262668FR is a single-set SS4 Plus Deep Stage rear brake kit in Fire Red, built for Ford 8.8 inch rear ends with C-clip eliminators. It uses two S4 calipers, each with four pistons, clamped onto 11 inch two-piece slotted and drilled rotors.
The SS4 Plus Deep Stage is a drag race system built for heavy, fast cars that may see street use. It uses two calipers and is sized for wheels of 15 inch and larger.
Key features
- Two S4 calipers in a two-piece design, with 1.75 inch pistons, manufactured in Phoenix, Az
- Stainless steel abutments and noise suppression clips work with hard anodized aluminum pistons
- Powder coated Fire Red finish
- Two-piece slotted, drilled and zinc-plated rotor
- Billet aluminum hats drilled for 5/8 inch wheel studs
- Dust and weather seals, with the DR1 or HB100 pad type
- Rotors come pre-assembled with NAS high grade stainless hardware
Brake fluid and rear hardware checks
Rear disc systems depend on clean, fresh brake fluid to keep pedal feel consistent under heat. Fluid absorbs moisture over time, which lowers its boiling point, so it is worth replacing it on a regular schedule and after any hard use in wet or high heat conditions.
Before the first drive, check that every hose and fitting is tight and free of kinks, and that the rotor hardware is torqued correctly. With two calipers the system has more fluid and more pistons to bleed, so bleed each caliper fully and recheck the pedal before driving on public roads.
- Use fluid rated for high-temperature use
- Check pad thickness at each service
- Inspect rotors for heat cracks and scoring
- Recheck hub bolt torque after early runs
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262668FR |
| UPC | 844165049128 |
| Sold as | Kit |
| Caliper | S4, four-piston per caliper, fixed, two-piece, Fire Red |
| Caliper quantity | 2 |
| Piston size | 1.75 inch |
| Rotor outside diameter | 11.0 inch |
| Rotor type | Two-piece, vented, slotted and drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.02 |
| Pad type | DR1 or HB100 (FMSI DR1) |
| Friction material | Semi-metallic |
| Grade | Performance |
| Axle flange | Ford 8.8 inch, C-clip eliminator |
| Axle flange requirement | 5.75 inch |
| Axle standoff | 2.5 inch |
| Wheel bolt pattern | 5 lug, 5×4.50/5×4.75 |
| Minimum wheel diameter | 15.0 inch |
| Park brake | No |
| Brake hoses included | No |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
This kit has no listed vehicle fitment. The application is Ford 8.8 inch rear axles with C-clip eliminators and a 5×4.50/5×4.75 bolt pattern, and it will not work with C-clip axles.
Axles still fitted with C-clips fall outside this application, and the axle flange should be 5.75 inch. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Eliminators must be in place first, because the kit will not work with C-clip axles. Rotors come pre-assembled and mounting hardware is included. Brake hoses are not part of the kit, and no park brake is supplied.
What’s included
Two S4 calipers, two-piece rotors pre-assembled with stainless hardware, and the mounting hardware.
Not included: lug nuts, brake hoses, a front rotor and a park brake.















