Overview
The Baer Brakes Pro Plus front brake kit 4261217S is a silver 6-piston disc brake system for Ford and Mercury cars from 1970 to 1974 built with OE drum brake spindles. It uses a 6P caliper on a 14.0 inch 2-piece slotted, drilled, zinc-plated rotor with a billet aluminum hat. It fits the Ford Falcon, Fairlane, Maverick, Mustang and Torino and the Mercury Comet, Cougar, Cyclone and Montego.
Pad type is FMSI D0731, and the wheel-clearance template is Q082P. The hubs are billet aluminum with premium bearings packed in Redline synthetic grease, and the rotors are pre-assembled with NAS high grade stainless hardware. Plan on a minimum wheel diameter of 18.0 inch when choosing wheels.
Key features
- Six-piston 6P caliper in silver, manufactured in Phoenix, Az
- CNC machined from U.S.-sourced forged or billet aluminum
- Powder coated finish
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- 2-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Rotors pre-assembled with NAS high grade stainless hardware
Larger rotors and wheel room
A 14 inch rotor changes the amount of space the brake assembly takes up inside the wheel. Larger rotors give more swept area, which spreads heat over a wider surface, but the caliper, hub face and wheel spokes all share the same room. Measure the wheel’s backspacing and inside clearance before buying, because some wheels that cleared a drum spindle will rub against a larger assembly.
Pads for a six-piston setup are pressed against the rotor with more force at each stop, so the pad compound and the caliper pistons should be considered together. Uneven wear can appear when pistons are not kept clean, and a sticking piston may drag the pad. Keep the caliper slide pins lubricated and check the pistons for smooth movement during routine service.
- Check wheel inside clearance against the caliper body
- Confirm the master cylinder can supply the larger caliper volume
- Check pedal feel after bleeding the system
- Replace pads in matched sets on both sides
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261217S |
| UPC | 844165021414 |
| Caliper | 6P, 6-piston, fixed, silver |
| Pad type | FMSI D0731 |
| Rotor | 2-piece, vented, slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.15 |
| Minimum wheel diameter | 18.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50 |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Hose | Braided steel, DOT approved |
| Hubs | Billet aluminum |
| Template | Q082P |
| Emission code | 6 |
| Axle | Front |
Vehicle fitment
Covered vehicles include 1970 Ford Fairlane, 1970 Ford Falcon, 1970-1974 Ford Maverick, 1970-1973 Ford Mustang, 1970-1971 Ford Torino, 1971-1974 Mercury Comet, 1970-1973 Mercury Cougar, 1970 Mercury Cyclone and 1970-1971 Mercury Montego, all equipped with OE drum brake spindles.
Not covered: 1974 Ford Mustang, 1970 Mercury Comet, Ford Torino or Mercury Montego models outside 1970-1971, and Mercury Cyclone after 1970. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check wheel clearance with template Q082P first, because the minimum wheel diameter is 18.0 inch. Fitment notes call for OE drum brake spindles. A qualified brake shop or technician should handle the fitting.
What’s included
Front rotor with billet aluminum hat, 6P calipers, billet aluminum hubs with premium bearings and billet dust caps, mounting brackets, stainless braided hoses and hardware.
Not included: lug nuts.














