Overview
The Baer Brakes 4301299R is a Pro front brake system for the 2006–2009 Chevrolet Trailblazer SS, finished with red 6-piston calipers and 14 inch slotted, drilled rotors. It is made for 2WD and AWD Trailblazer SS vehicles and uses the OE spindles and hubs.
Each hub is assembled at Baer before it goes out, with bearings and races fitted and packed in Redline synthetic grease. The calipers are CNC machined from forged or billet aluminum and manufactured in Phoenix, Az, so the front end can be bolted to the control arms without building hubs by hand.
Key features
- Red powder-coated finish on the 6-piston caliper
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons that help limit uneven pad wear
- Dual seals against dust, weather and pressure
- Iron rotor with an aluminum hat, 14 inch, slotted, drilled and zinc plated
- Hubs arrive with bearings and races already installed
Caring for painted calipers
Powder-coated calipers hold their finish best when kept clean. Brake dust builds up quickly on a red caliper, so rinse the wheels and calipers with plain water after driving on dirty roads. Avoid strong solvents on the coating, and use a wheel cleaner made for painted surfaces.
Coating wear usually shows first near the pad contact area and where stones strike the caliper body. Small chips can be touched up, but repeated impacts can expose bare metal. A quick look during tire rotations shows whether the finish is holding up and whether the pads still have usable material.
- Rinse brake dust off the calipers regularly
- Inspect the caliper body for chips after gravel driving
- Check pad thickness at every rotation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301299R |
| UPC | 844165038764 |
| Sold as | Kit |
| Caliper | 6-piston (6P), red |
| Rotor diameter | 14 inch |
| Rotor style | Slotted, drilled |
| Rotor material | Iron with aluminum hat |
| Front rotor included | Yes |
| Lug nuts included | No |
| Wheel bolt pattern | 6×5.00 |
| Minimum wheel diameter | 18.0 inch |
| Hoses | Reuses OE hoses |
| Template | Q077P |
| Country of origin | US |
Vehicle fitment
It covers the 2006–2009 Chevrolet Trailblazer (SS) and both its 2WD and AWD versions.
Model years outside 2006–2009 and GM models not on the list are not covered by this fitment entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hubs come pre-built, so the work centers on bolting the assembly to the control arms and reusing the OE hoses. Lug nuts are not included, so choose nuts that suit the 6×5.00 bolt pattern and your wheels.
Baer cannot guarantee that every aftermarket wheel will clear this brake. Check wheel clearance with template Q077P and keep the 18.0 inch minimum wheel diameter in mind. Have a qualified technician handle the brake work.
What’s included
The kit includes the front 6-piston calipers, 14 inch front rotors, and hubs with bearings and races installed. It reuses the vehicle’s OE hoses.
Not included: Lug nuts.













