Overview
The Baer Brakes Extreme Plus rear brake system, part number 4262096R in red, is a rear disc brake kit for Ford 9 inch rear axles with early big bearing housing ends and a 5 on 4.50 or 5 on 4.75 wheel bolt pattern. It pairs a 1-piece Monoblock 6-piston caliper with a 14.0 inch two-piece rotor and a backing plate that also carries a park brake shoe assembly.
The axle housing type is the fitment reference for this kit. The caliper is manufactured in Phoenix, Arizona, and the kit comes with stainless braided hoses.
Key features
- 1-piece Monoblock 6-piston 6S caliper with a powder coated finish
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- CNC machined from US-sourced 2618 aluminum forging
- 2-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Rotors pre-assembled with NAS high grade stainless hardware
- Stainless braided hoses and hardware included
Pad wear and rotor checks
Brake pads and rotors wear in pairs, so inspect both at every service. Pad thickness can be checked through the caliper window, and the pads should wear evenly across both faces. Uneven wear can point to a sticking caliper piston or a seal problem, which is worth fixing before it damages the rotor.
On a drilled and slotted rotor, look at the edges of the holes and slots for cracking. Check the rotor face for heat checking, grooves and blue discoloration. Measure thickness at several points and replace the rotor if it is worn past its minimum thickness.
Park brake shoes should be checked when the rear hub is opened, because the shoe linings wear separately from the service pads. Replace worn shoes as a set so the parking brake holds evenly.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262096R |
| UPC | 844165035923 |
| Caliper | 1-piece Monoblock, 6-piston, 6S, fixed |
| Caliper color | Red |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.25 |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Brake pad FMSI number | D1247 |
| Template | N085P |
| Wheel bolt pattern | 5×4.50/5×4.75 in |
| Lug count | 5 |
| Minimum wheel diameter | 18.0 inch |
| Axle | Rear, Ford 9 inch early big bearing flange |
| Hose material | Stainless steel |
| Includes park brake | Yes |
| Emission code | 6 |
| Country of origin | US |
| Supplied as | Kit |
Vehicle fitment
It is for Ford 9 inch early big bearing rear axle housing ends, an axle type rather than a make, model or year. Confirm your axle housing and vehicle details before buying.
Baer cannot guarantee fit with every wheel style, so compare the N085P template to your wheel. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The park brake shoe sits inside the backing plate, so this is a full rear system rather than a simple caliper bolt-on. Plan for park brake cables separately and check wheel clearance against the 18.0 inch minimum wheel diameter with template N085P. Brake work on a rear axle should be done by a qualified technician.
What’s included
The kit includes the 6S Monoblock caliper, the 14.0 inch rotor pre-assembled with stainless hardware, the backing plate with its park brake shoe assembly, and stainless braided hoses with hardware.
Not included: the front rotor, the park brake cables and the lug nuts.















