Overview
Part 4261050B is the Baer Brakes Extreme front brake system in black, made for the 2004–2008 Ford F-150 with four-wheel drive. It pairs a 1-piece Monoblock 6-piston 6S caliper with a 15-inch slotted and drilled rotor, and the rotor surface is zinc plated.
The set includes the caliper, rotor, mounting brackets and hardware for the front axle. It uses the D1247 pad type and keeps the truck’s original equipment hoses, so the hydraulic connections stay as they were. The 15-inch Extreme fits wheels that are 19 inches or larger.
Key features
- 6S six-piston Monoblock caliper, built in Phoenix, AZ
- 2618 aluminum forging, CNC machined, U.S.-sourced
- Black powder-coated finish
- Stainless pistons, abutments and noise-suppression clips
- Pistons staggered to reduce uneven pad wear
- Dual seals keep out dust and weather
- Zinc-plated 1-piece rotor with slots and drilled holes
- Original hoses re-used
Choosing the right setup
Start with the drivetrain and the wheel. A four-wheel-drive truck puts different loads through the front axle than a two-wheel-drive model, and brake sizing has to match the job. Once the wheel is confirmed, look at how the caliper sits behind the spokes so there is room for the pads and dust shield to move freely.
Black calipers hide road grime well, which suits trucks that see mud and dust. Keep an eye on the dust seals and pistons anyway, because grit that gets past worn seals can score the bore over time. A quick wipe after rough trails helps the finish and keeps the moving parts working freely.
- Measure wheel clearance before ordering
- Replace worn hoses while the wheels are off
- Keep a torque wrench handy for the lug nuts
- Bed in new pads at moderate speeds first
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261050B |
| UPC | 844165030928 |
| Sold as | Kit |
| Axle | Front |
| Drive | 4WD |
| Caliper | 6S, 1-piece Monoblock, 6-piston, fixed |
| Caliper color | Black |
| Rotor outside diameter | 15.0 inch |
| Rotor thickness | 1.18 |
| Rotor construction | 1-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron |
| Front rotor included | Yes |
| Pad type (FMSI) | D1247 |
| Minimum wheel diameter | 19.0 inch |
| Lug count | 6 lug |
| Bolt pattern | 6x135mm |
| Template | N063U |
| Hose | Re-uses OE hoses |
| Emission code | 6 |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
The kit fits 2004–2008 Ford F-150 trucks with four-wheel drive. The application reads Ford F150 04-08 and Drive 4WD.
Two-wheel-drive F-150 trucks are not covered here, and other Ford vehicles are outside this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wheels and clearance decide whether this front system works for you. Measure the wheel you plan to use, since the minimum diameter is 19.0 inch, and test the N063U template on it. Lug nuts must be supplied separately. A technician with disc brake experience should handle the install and the bleed procedure.
What’s included
The package holds the black 6S Monoblock caliper, the 15-inch front rotor, mounting brackets and the included hardware.
Not included: Lug nuts.














