Overview
The Axia Alloys 1.125-inch black strap clamp (part AXIMODCL1.125-BK) is a billet clamp from the Modular Clamping System for mounting accessories to a roll cage.
It snaps around the tubing and sits low, which keeps room for windshields, roofs and other accessories.
Key features
- Billet clamp for roll cage tubing
- Low profile around the tubing
- Black finish
- Part of the Modular Clamping System
Choosing and using strap clamps
Strap clamps hold accessories to roll cage tubing without drilling the cage. Most of the work is in matching the clamp to the tube it wraps. A clamp that sits loosely will slip under load, and one that is tightened too hard can distort the mounting point. Set the clamp square on the tube and tighten it evenly so both sides of the strap take the load.
Clamps tend to be replaced alongside the mounts and brackets they carry, since those parts take the same loads. When you add a clamp, look at the accessories on that section of cage as a group. Heavy items such as racks or light bars need extra clamp points. Inspect the billet body for cracks around the bolt holes, and re-tighten after the first few trail sessions.
- Match clamp size to the tubing before ordering
- Tighten both sides evenly
- Inspect for cracks around bolt holes
- Recheck fasteners after early trail use
Specifications
| Brand | Axia Alloys |
|---|---|
| Part number | AXIMODCL1.125-BK |
| Clamp size | 1.125 inch |
| Finish | Black |
| Construction | Billet |
| System | Modular Clamping System |
Vehicle fitment
It mounts to roll cage tubing rather than to one specific vehicle. Measure your tubing to confirm the 1.125-inch size before ordering.











