Overview
The ATK 2DE3 is a remanufactured cast iron cylinder head with a natural finish. It is a direct fit OEM replacement for the 2003 Jeep Liberty (KJ) Sport and the 2003 Jeep Wrangler (TJ) SE.
Each head is reverse engineered during remanufacturing to remove any original factory defects. Fitment is limited to 2003 model year vehicles, so confirm yours before installing.
Key features
- Remanufactured cast iron cylinder head
- Reverse engineered during remanufacturing to remove original factory defects
- Natural finish
- Direct fit OEM replacement type
- Two 2003 applications: Liberty KJ Sport and Wrangler TJ SE
Head work on 2003 engines
Head replacement on a Liberty KJ or Wrangler TJ is a full engine job that touches the timing components, the intake and exhaust manifolds, and the cooling system. Before the head goes on, the sealing surfaces should be clean and flat, and the bolt holes should be clear of old thread sealant and debris. A remanufactured casting still needs these checks because the gasket surface is what seals combustion pressure.
Plan the work around the gasket, bolts and any parts disturbed during removal. Many owners replace the timing components, the water pump and the thermostat while the engine is open. Keep records of torque values and sequence so the job can be reviewed later, and test the cooling system and oil for signs of mixing once the engine is back in service.
- Clean and inspect sealing surfaces
- Clear bolt holes of old sealant
- Replace the water pump and thermostat
- Keep torque records for the job
Specifications
| Brand | ATK North America |
|---|---|
| Part number | ATK2DE3 |
| Material | Cast iron |
| Finish | Natural |
| Fitment type | Direct fit |
| Type | OEM replacement |
Vehicle fitment
It fits the 2003 Jeep Liberty (KJ) (Sport) and the 2003 Jeep Wrangler (TJ) (SE).
Other years and trims of the Liberty KJ and Wrangler TJ, along with Cherokee XJ and Grand Cherokee WJ models, are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Head work on a Liberty or Wrangler engine should be done by a qualified mechanic, who can confirm fit and gasket surfaces before the engine is assembled.
What’s included
The package is the cylinder head and nothing else.
Not included: Gaskets and hardware: check what your installation needs before starting.





