Select your vehicle

Artec Fuel Cell Mount – FM0132

Artec Industries

Shop Artec Industries Jerry Can on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Six-piece steel mount set for Artec FM0132, built for 32-gallon Pro Sport and Pro Sport II fuel cells
  • Compatible with cell prefixes 270, 272, 273, 274, 280, 281, 282 and 283
  • Two CNC cut 16 gauge tops and two 10 gauge side brackets and bases
  • Bare steel finish that requires paint, powdercoat or plating; 1/4-inch hardware included

Description

Overview

The Artec Industries FM0132 is a fuel cell mount for 32-gallon Pro Sport and Pro Sport II fuel cells, supplied as a six-piece steel bracket set that holds the cell in a vehicle. It is made for the Pro Sport and Pro Sport II cell prefixes below. It is a stronger option than steel straps, and installation requires drilling the cell flange to match the mount tops.

The set works for tube-chassis builds and flat surfaces alike. The bases are shaped like a C so they can be notched around chassis tubing. For flat mounting, such as in a truck bed, the bases are left off. The steel is bare, so it needs paint, powdercoat or plating to resist rust.

Key features

  • Two CNC cut, bent and dimpled tops made from 16 gauge cold roll steel
  • Two 10 gauge side brackets and two 10 gauge bases for strength
  • Bases shaped like a C to allow notching for tube chassis
  • Bases can be left off for flat surface mounting, such as in a truck bed
  • Top bolt holes line up with the bolt holes on the fuel cell flange
  • Tops are wide enough for extra holes across the flange, which the brand recommends for high speed racing
  • Works with foam and non-foam versions of the fuel cell

Racing and street fuel cell builds

Fuel cell mounts are used in both race and street builds, and the right installation depends more on how the vehicle is driven than on the mount alone. A cell that sees hard cornering, jumps or frequent off-camber driving needs tighter fasteners and a more careful check of the mounting points than one used for occasional trips.

Extra bolt holes across the flange can help spread load across the cell, which is useful when a build calls for more securing points. Keep the bare steel protected after drilling, and inspect the flange for cracks around every hole. Fuel line routing, firewall barriers and fire-resistant covers are also worth reviewing when planning a fuel cell install.

  • Add holes only after measuring twice
  • Protect the steel after drilling
  • Inspect flange cracks around holes
  • Review line routing and shielding

Specifications

Brand Artec Industries
Part number FM0132
UPC 816791020833
Model 132
Can size 32 gallon
Fluid type Gasoline
Pieces 6
Top material 16 gauge cold roll steel
Side brackets and bases 10 gauge steel
Overall dimensions 26.625 L x 18.625 W x 18.625 H
Included hardware 1/4-inch hardware
Finish Bare steel; requires paint, powdercoat or plating to prevent rust
Compatible fuel cells Pro Sport and Pro Sport II, prefixes 270, 272, 273, 274, 280, 281, 282 and 283

Vehicle fitment

No vehicle is covered by this mount. It is matched to Pro Sport and Pro Sport II fuel cells by prefix rather than to a particular car or truck, so check the cell prefix and mounting location before ordering.

Pro Sport cells with other prefixes fall outside this mount’s fit. Confirm your cell prefix before ordering.

Installation notes

The mount needs holes drilled in the fuel cell flange. The top bolt holes line up with the flange holes, and extra holes can be added across the flange. Measure and mark carefully before drilling. Paint or plate the steel before installing it, and take care with all drilling on a fuel cell.

What’s included

The set contains six pieces: two tops, two 10 gauge side brackets and two 10 gauge bases, along with 1/4-inch hardware.

Not included: the fuel cell itself, which the mount is designed to hold.

SKU: A/IFM0132 Category:

Specification

Shipping weight 26.00 lbs
Package dimensions 22.30 × 10.50 × 1.30 in
brands

Questions & Answers

Which fuel cells does the FM0132 mount fit?

It is made for Pro Sport and Pro Sport II fuel cells with prefixes 270, 272, 273, 274, 280, 281, 282 and 283, such as 270-032-06. It works with foam and non-foam versions of those cells. Confirm your cell prefix and mounting setup before ordering.

Does the Artec FM0132 need drilling?

Yes. The fuel cell flange needs bolt holes drilled to match the mount tops. Extra holes can be added across the flange for high speed racing setups. Measure and mark carefully before drilling.

What finish does the mount come with?

The mount has a bare steel finish. It requires paint, powdercoat or plating to prevent rust. The set includes 1/4-inch hardware and six pieces in total.

Can the FM0132 be used on a flat surface?

Yes. For flat surface mounting, such as in a truck bed, the bases are not used. The tops and side brackets still apply, and the set is designed to work for both tube chassis and flat mounting.

Can the same mount be used in a street build as in a race build?

Yes, the mount is the same part either way, so the difference comes from installation and use. Confirm the cell prefix, drilling and fastener checks suit how the vehicle will be driven.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Artec Industries Jerry Can on Amazon