Select your vehicle

Aries Offroad Ascentstep 5.5″ Running Boards – 2057991

Aries Offroad

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Direct fit, no-drill running boards for selected 2000–2022 Ford, GMC, Chevrolet and Ram trucks
  • Part number ARS2057991, cab length, boards measuring 5-1/2 inches wide
  • Teardrop tube profile with polyethylene treads over stainless steel overlays
  • Gloss black carbide powder coat over high-strength steel
  • VersaTrac brackets are not included with the boards

Description

Overview

The Aries Offroad AscentStep 5.5-inch running boards, part ARS2057991, are steel side steps with a teardrop-shaped tube profile, made for selected 2000–2022 Ford, GMC, Chevrolet and Ram trucks and SUVs. Each set is built for a specific year, make and model, with brackets, board length and step pad position matched to that vehicle.

AscentStep boards use a no-drill custom fit through the Aries VersaTrac installation system. VersaTrac brackets mount to the truck without drilling or tedious modifications, and the same brackets can take other VersaTrac running boards and side steps. The mounting brackets are not included with this set.

Key features

  • Teardrop-shaped tube profile that sets the boards apart from oval side steps
  • Rounded, blended end caps on boards measuring 5-1/2 inches wide
  • Two-part step pads: a polyethylene tread that protrudes through a stainless steel overlay
  • Angled step pad treads for dependable non-skid traction
  • High-strength steel construction with a carbide black powder coat finish
  • Powder coat that resists rust and corrosion and stays scratch- and scuff-resistant
  • No-drill custom fit through the VersaTrac installation system

Care and inspection

Powder-coated steel holds its finish when grit and road salt are rinsed away regularly. Wash the boards and the bracket joints after trips on wet or salty roads, paying attention to the gaps where debris collects. Minor scratches can be cleaned and touched up before rust starts to spread underneath.

Check the step pads, end caps and mounting points every few months. Tread that has worn smooth reduces grip, and loose fasteners can allow movement under load. Because the bracket system ties the board to the truck, any movement at the bracket should be corrected before the next drive.

  • Rinse grit from joints after rough drives
  • Inspect step pad tread for smoothing
  • Re-check mounting hardware periodically
  • Touch up scratches early

Specifications

Brand Aries Offroad
Part number ARS2057991
Product type Running boards (AscentStep)
Length Cab length
Width 5-1/2 inches
Tube profile Teardrop-shaped
Construction High-strength steel
Step pads Polyethylene tread with stainless steel overlay
Finish Gloss black, carbide black powder coat
Installation system VersaTrac, vehicle-specific brackets, no drilling (brackets not included)
Fitment type Direct fit

Vehicle fitment

Aries lists these running boards as a direct fit for the following vehicles: 2007–2021 and 2007–2026 Chevrolet Silverado 1500, 2500 HD and 3500 HD; 2015–2020 and 2016–2019 Chevrolet Suburban (including the 3500 HD); 2015–2022 Ford F-150; 2022 Ford F-150 Lightning; 2000–2022 Ford F-250 Super Duty and F-350 Super Duty; 2007–2021 GMC Sierra 1500; 2007–2026 GMC Sierra 2500 HD and 3500 HD; 2015–2020 GMC Yukon XL; and 2019–2026 Ram 1500.

The listed trims differ by model. The Silverado 1500 list includes Custom, LT and High Country, while the Ram 1500 list covers Big Horn, Laramie and Rebel.

Years and models outside this list are not covered, including the Ford F-150 before 2015 and the Ram 1500 before 2019. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because each set is designed for a specific year, make and model, match the boards to your vehicle before fitting. Mounting brackets are not included, so get VersaTrac brackets for your vehicle first. With the brackets installed, any VersaTrac running board can be mounted on them, which makes changing the look later straightforward.

What’s included

The set includes the running boards only.

Not included: VersaTrac mounting brackets, which the boards mount to on the vehicle.

SKU: ARS2057991 Categories: ,

Fitment

VehicleYearsTrims
Chevrolet Silverado 15002007–2021Custom, Custom Trail Boss, High Country, Hybrid, LS, LT, LT Trail Boss, LTZ, RST, SSV, WT, XFE
Chevrolet Silverado 2500 HD2007–2026Custom, High Country, LT, LTZ, WT
Chevrolet Silverado 3500 HD2007–2026High Country, LT, LTZ, WT
Chevrolet Suburban2015–2020LS, LT, LTZ, Premier
Chevrolet Suburban 3500 HD2016–2019LS, LT
Ford F-1502015–2026King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, Tremor, XL, XLT
Ford F-150 Lightning2022–2026Lariat, Platinum, Pro, XLT
Ford F-250 Super Duty2000–2022Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL, XLT
Ford F-350 Super Duty2000–2022Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL, XLT
GMC Sierra 15002007–2021AT4, Base, Denali, Hybrid, SL, SLE, SLT, WT, XFE
GMC Sierra 2500 HD2007–2026AT4, Base, Denali, SLE, SLT, WT
GMC Sierra 3500 HD2007–2026AT4, Base, Denali, SLE, SLT, WT
GMC Yukon XL2015–2020Denali, SLE, SLT
Ram 15002019–2026Big Horn, HFE, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Rebel, Special Service, TRX, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Are the Aries AscentStep 5.5 running boards no-drill?

Yes. The AscentStep uses a no-drill custom fit through the Aries VersaTrac installation system. The VersaTrac brackets mount to the truck without drilling, but they are not included with the boards.

Will the Aries AscentStep fit my 2019 Ram 1500?

Yes. The listed fitment includes the 2019–2026 Ram 1500, with trims such as Big Horn, Laramie, Limited, Rebel and Tradesman. Confirm your vehicle's year, model and trim before ordering.

Does the AscentStep fit a Jeep?

No. The fit covers Chevrolet, GMC, Ford and Ram trucks and SUVs only, and Jeep models are not covered. Confirm your vehicle's year, model and trim before ordering.

What finish and width do the AscentStep boards have?

The boards have a gloss black finish with a carbide black powder coat, and they measure 5-1/2 inches wide. The step pads use a polyethylene tread over a stainless steel overlay.

Can I move AscentStep boards to a different truck?

Not directly. The boards are built for a specific year, make and model, so the brackets and board position must match the new vehicle. Check the year, model and trim against the new truck before buying any replacement set.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon