Overview
The ARB 10900027 is a 12/24V DC wiring kit for ARB portable fridges. It supplies 20ft (6m) of double insulated 8 gauge (6mm) auto cable with a pre-assembled in-line fuse and eyelets, ready to connect to your battery terminals. The kit is marked Universal Fit and is not tied to a specific vehicle.
Key features
- 20ft (6m) of double insulated 8 gauge (6mm) auto cable
- Pre-assembled in-line fuse
- Eyelets for battery terminals, 8mm (5/16 inch)
- Two 1/4 inch side entry quick-connect terminals with insulators
- Terminals supplied loose so the cable can be trimmed to length
Wiring and fuse protection
A fridge wiring run carries current over the full length of the cable, so the fuse and the routing both matter. Keep the fuse as close to the battery as the installation allows, and route the cable away from moving parts, hot components and sharp edges. Secure it at regular intervals so it does not chafe during travel.
Before connecting anything, decide how the fridge will be powered when the vehicle is off. Many setups add a separate battery management device so the starting battery stays usable. Use the correct tools for the eyelets and terminals, and make sure every connection is tight and insulated.
- Place the fuse near the battery
- Route cable away from heat and edges
- Secure cable at regular intervals
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 10900027 |
| UPC | 9332018022233 |
| Color | Black |
| Cable length | 20ft (6m) |
| Cable gauge | 8 gauge (6mm), double insulated auto cable |
| Eyelet size | 8mm (5/16 inch) |
| Quick-connect terminals | 2 x 1/4 inch side entry, with insulators |
| Fuse | In-line, pre-assembled |
Vehicle fitment
Match the kit to your vehicle’s battery voltage, 12V or 24V, before wiring it. Confirm the connection plan for your battery before starting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The terminals are supplied loose and are soldered on at installation. Trim the cable to a suitable length first, since a suitable length helps minimize voltage drop to the fridge. Match the + and – markings on the rear of the socket when connecting. Disconnect the battery before attaching the cable to the battery terminals.
What’s included
The kit includes 20ft (6m) of double insulated 8 gauge (6mm) auto cable with in-line fuse and eyelets (8mm, 5/16 inch), plus two 1/4 inch side entry quick-connect terminals and insulators.
Not included: the portable fridge, and soldering equipment for attaching the terminals.









