Overview
The AMP Research 79412-01A is a heavy-duty mounting bracket kit for the AMP Research BedStep2, with a textured black powdercoat finish and a steel plate. The stored fitment list shows the 2015-2019 Ford F-150 (King Ranch, Lariat, Platinum, SSV, XL, XLT).
The kit is designed for the BedStep2 and is required on all cabs except Mega Cab. It is also used on dually trucks. Confirm the cab and dually configuration of your truck before ordering.
The kit is sold as a kit, and the BedStep2 itself is a separate product that must be bought separately from the bracket kit.
Key features
- HD mounting bracket kit for the BedStep 2
- Steel plate
- Textured black powdercoat finish
- Required on all cabs except Mega Cab
- Sold as a kit
Checks before mounting
A bracket kit like this supports a step that takes body weight and foot traffic, so the mounting points on the truck need to be sound before the bracket goes on. Look for rust, cracked welds or damaged bed-side structure, and address any problem first. Clean the mounting surfaces so the bracket sits flat against them.
Check the steel plate and powdercoat finish for chips or scrapes when unpacking the kit. Touch up any bare steel to slow corrosion before installation. Plan the job with a helper if the step is heavy, and keep the fasteners sorted so none are lost during the work.
- Inspect the mounting surfaces for rust or cracks
- Touch up chipped powdercoat on the bracket
- Keep fasteners sorted by location
- Check step clearance through full range before driving
Specifications
| Brand | AMP Research |
|---|---|
| Part number | 79412-01A / AMP79412-01A |
| Product type | BedStep installation (mounting bracket) kit |
| Designed for | BedStep2 |
| Material | Steel plate |
| Finish | Textured black powdercoat |
| Sold as | Kit |
| Fitment type | Direct fit |
Vehicle fitment
The stored manufacturer fitment list for the AMP Research 79412-01A covers the 2015-2019 Ford F-150 (King Ranch, Lariat, Platinum, SSV, XL, XLT).
It fits the 2015-2019 Ford F-150 in the King Ranch, Lariat, Platinum, SSV, XL and XLT trims. Other Ford F-150 generations are not covered. Confirm the cab and dually setup against your truck before ordering.
Installation notes
Follow the included steps and tighten all fasteners fully. Use professional installation if you are unsure about any step. The bracket carries body weight, so every fastener needs to be fully tightened as the installation steps direct.
- Support the vehicle safely and work on level ground.
- Check clearance and operation through the full range of motion before driving.
- Re-check fasteners after the first miles of driving and at regular service intervals.
What’s included
A heavy-duty mounting bracket kit for the BedStep2.
Not included: The BedStep2 step itself.











