Overview
The AMP Research BedStep 75313-01A is a flip down bumper step for the 2017–2021 Ford F-250 Super Duty and F-350 Super Duty. It swings down from under the rear bumper, giving a lower step for reaching the bed when loading or unloading heavy cargo.
The step has a non-slip surface and supports 300 lbs. Frame mounting places it under the rear bumper, so it works with the tailgate open and while towing.
The trims covered are King Ranch, Lariat, Limited, Platinum, XL and XLT for both the F-250 and F-350 Super Duty.
Key features
- Flip down bumper step that folds out from under the rear bumper
- Non-slip surface for footing
- Supports up to 300 lbs
- Frame mounted under the rear bumper
- Works with an open tailgate and while towing
Heavy-duty bumper step use
Super Duty trucks carry heavier loads and sit higher than lighter pickups, so a flip-down step is often the safest way to reach the bed. The step is best used as a footing aid rather than a platform, and it should be used with the truck parked on firm, level ground. Keep the step clear of dirt and water to maintain grip.
Bumper area fasteners take more stress on heavy-duty trucks, especially when towing. After the first few hitches or long trips, check the step pivot and bolts. Clean the pad and look for scrapes on the bumper finish, which can be touched up to limit rust.
- Use on firm, level ground
- Check pivot and bolts after towing
- Touch up bumper scrapes promptly
Specifications
| Brand | AMP-Research |
|---|---|
| Part number | AMP75313-01A |
| Operation | Flip down |
| Surface | Non-slip |
| Weight support | 300 lbs |
| Mounting | Frame mounted under rear bumper |
| Fitment | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2017–2021 Ford F-250 Super Duty and F-350 Super Duty, with trims King Ranch, Lariat, Limited, Platinum, XL and XLT.
The 2016 and earlier Super Duty years and 2022 and later years are not covered, and the F-450 and F-550 are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install is done beneath the truck, since the step is frame mounted under the rear bumper. Read the mounting instructions before starting, and check the area around the bumper before final tightening.
What’s included
Confirm the mounting hardware on delivery before beginning the install.









