Overview
Part number AIR57250 is the AirLift LoadLifter 5000 rear leaf spring leveling kit, a no-drill air suspension kit for the rear of a vehicle. It supports up to 5000 lbs of leveling capacity with air springs adjustable from 5 to 100 psi.
AirLift lists installation time at 2 hours or less. The kit includes two-ply fabric air springs, polymer quick connect fittings and reinforced bellows.
Key features
- No drilling required
- Up to 5000 lbs leveling capacity
- Two-ply fabric reinforced air springs
- Quick connect polymer fittings
- Reinforced air bellows
- Air pressure adjustable 5 to 100 psi
- Vehicle specific illustrated installation manuals
- Limited lifetime warranty
Before you install air springs
Air springs add support at the rear without changing the springs themselves, so they work best when the load is steady. Check tire pressure and the rear ride height before you begin, and note whether the vehicle sits level with and without cargo. Once the system is installed, inflate it in small steps and watch the ride height so the rear rises evenly.
Air line routing matters as much as the springs. Keep lines clear of exhaust heat, sharp edges and anything that rubs during axle travel. Plan the route before cutting or sleeving tubing, and reconnect fittings only after the lines are in place.
- Level the vehicle on flat ground before setting pressure
- Route lines away from exhaust and moving parts
- Keep a tire gauge and a spray bottle of soapy water handy
Specifications
| Brand | AirLift |
|---|---|
| Part number | AIR57250 |
| UPC | 729199572500 |
| Application | Rear |
| Drilling | Not required |
| System type | Air bag |
| Leveling capacity | Up to 5000 lbs |
| Air pressure range | 5 to 100 psi |
| Installation time | 2 hours or less |
| Warranty | Limited lifetime |
Vehicle fitment
Make sure your vehicle’s year, model and trim match the kit before ordering. It is a rear leaf spring leveling kit, so the rear suspension setup must suit your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a no-drill kit with installation time of 2 hours or less. Keep the air lines away from moving suspension parts and check all fittings for leaks after setting pressure.
What’s included
Air springs, polymer fittings and vehicle-specific illustrated installation manuals come with the kit.












