Overview
The AirLift 1000 Series replacement air bag, part number 60311, is a direct replacement for an AirLift coil spring kit. It can also be used when you build your own custom air system, so it suits both swap-outs and new builds.
AirLift cross-references PN 60811 for this bag. No vehicle years, makes or models are named, so check mounting and application before ordering.
Key features
- Direct replacement for an AirLift coil spring kit
- Suitable for a custom air suspension build
- Part of the AirLift 1000 Series of air bags
- Cross-referenced to PN 60811
Air bag care and custom builds
An air bag in a coil spring replacement or custom build carries load through its bellows, so the bag wall and mounting points deserve regular inspection. Look for cracks at the bead, bulging, or rubbing against nearby parts. A bag that bulges at the top or sits off its mounting plate should be checked before continuing to use it.
In custom builds, the compressor, valves and lines must suit the bag and the load it carries. Pick line sizes and fittings that match the bag’s ports, and route the lines away from sharp edges. Recheck the bag and connections after the first few drives, since fittings can loosen as the system settles.
- Inspect the bead for cracks
- Check for bulges or rubbing
- Match lines and fittings to the bag
- Recheck connections after early drives
Specifications
| Brand | AirLift |
|---|---|
| Part number | 60311 |
| UPC | 729199603112 |
| Product line | AirLift 1000 Series |
| Bag type | Replacement air bag |
| Fitment | Universal fit, not vehicle-specific |
Vehicle fitment
It is a universal fit bag, and no vehicle is identified. It suits a coil spring replacement or a custom air build rather than one specific vehicle.
Confirm your vehicle’s year, model and trim before ordering. Verify mounting dimensions and ride height needs before fitting the bag.
What’s included
The replacement air bag only.
Not included: a compressor, air lines, valves or the coil spring kit itself.









