Overview
The AIRAID 401-278 is an MXP Series Synthamax Cold Air Dam intake system for the 2011–2016 Ford F-250 Super Duty and F-350 Super Duty. It is a direct fit cold air intake.
It uses a dry filter in a steel housing with a black finish. The kit is designed to reuse the truck’s existing inlet tube.
Key features
- MXP Series design
- Dry filter
- Steel housing with black finish
- Reuse factory inlet tube
- Cold air intake type
Engine bay clearance
Filter placement affects how much water, dust and heat reach the element. A housing set low in the engine bay can draw in splash from the road, so the position of the intake matters as much as the filter itself. Because the system reuses the factory inlet tube, the fit around that tube and the housing should be checked before final tightening.
Heavy-duty trucks carry large radiators, fan shrouds and hood latches, so it helps to check clearance before bolting everything down. Route the housing away from the bumper and wheel wells, and recheck it after the first few drives to confirm nothing has shifted.
- Keep the housing clear of the radiator and fan
- Check clearance to the hood and latch
- Recheck tightness after the first few drives
Specifications
| Brand | AIRAID |
|---|---|
| Part number | 401-278 |
| UPC | 642046442781 |
| Filter type | Dry |
| Filter housing type | Full or partial enclosure; confirm before installing |
| Filter housing material | Steel |
| Filter housing finish | Black |
| Inlet tube | Reuse factory |
| Intake type | Cold air |
| Fitment | Direct fit |
Vehicle fitment
The kit fits the 2011–2016 Ford F-250 Super Duty and F-350 Super Duty in the King Ranch, Lariat, Platinum, XL and XLT trims.
Other Ford trucks, including the F-150, are outside its fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The inlet tube reuses the factory part, so plan the install around the existing tube. Check the filter housing fit before tightening any hardware.









