Overview
The Addictive Desert Designs Stealth R Front Bumper, part number F113772890103, is a formed steel tube front bumper for the 2017–2018 Ford F-150 Raptor. The tube is .120 wall steel, which gives a tight fit to the front of the truck, and the bumper adds ground clearance and a better approach angle.
The vented skid plate directs air toward the intercooler through an integrated scoop behind it. The universal light mount on top takes up to 10 Duallys or a 40 inch straight or radius LED bar, and each side panel can hold a Rigid Industries Dually. The bumper is a tight fit to the front of the truck.
Key features
- Formed tube construction in .120 wall steel
- Vented skid plate with an integrated scoop that directs air toward the intercooler
- Top universal light mount for up to 10 Duallys or a 40″ straight or radius LED bar
- Side accent panels with room for a Rigid Industries Dually on each side
- Added ground clearance and a better approach angle
- Made in the U.S.A.
Ground clearance and approach
A bumper that sits tight to the front of the truck changes how the nose clears obstacles. Raising the lowest point of the bumper and angling its front face can improve approach angle, which helps on steep climbs and ledges. Check the skid plate’s clearance over rocks and ruts before a trip, since the lowest point of the vehicle matters most.
The vented skid plate is part of the cooling setup, so keep the vents clear of mud, snow and debris. Packed debris can block airflow to the intercooler during hard driving. Rinse the area after dusty or wet runs and inspect the scoop for bent edges after any contact.
- Clean vents and the scoop after muddy runs
- Inspect the skid plate for dents after rock contact
- Tighten bumper bolts once the first trail days are behind you
- Keep light wiring clear of the scoop
Specifications
| Brand | Addictive Desert Designs |
|---|---|
| Part number | F113772890103 |
| UPC | 814849023904 |
| Product type | Front bumper (Stealth R) |
| Position | Front |
| Width | Full |
| Material | Steel, .120 wall tube |
| Finish | Powder coat |
| Bumper color | Hammer black |
| Panel color | Satin black |
| Top mount | Up to 10 Duallys or a 40″ straight or radius LED bar |
| Side mount | Duallys |
| Light mounts | Included |
| Winch mount | Not included |
| D-ring mount | Not included |
Vehicle fitment
It fits the 2017–2018 Ford F-150 Raptor, and the bumper is designed around the Raptor’s intercooler and airflow scoop.
The design is built around the Raptor’s intercooler. Match your truck’s year, model and trim before buying.
What’s included
- Stealth R front bumper in Hammer black
- Satin black side accent panels
- Vented skid plate with airflow scoop
- Light mounts
Not included: The lights, a winch and D-ring mounts.




















