Overview
The Addictive Desert Designs Stealth Front Bumper, part number F052932680103, is a combination winch mount and bumper for 2009–2014 Ford F-150 trucks. It is a steel bumper in Hammer black with Satin black Stealth panels, and it includes light mounts for a 40 inch top bar, a 20 inch lower bar and four Duallys at the sides.
The F-150 and Raptor bumper line was designed to improve approach angle. The winch plate is rated for 10,500 lbs, so use only winches at or under that pull rating to keep the bumper warranty. This bumper is not for EcoBoost engines and will not work with a lift kit.
Key features
- Combination winch mount and bumper with Stealth panels
- Fully boxed frame horns in .120 wall steel tube construction
- Laser-cut skid plates, tabs and plates for a precise fit
- Stainless steel hardware, direct fit with no cutting or welding
- Light mounts: 40 inch light bar on top, 20 inch light bar below, four Duallys at the sides
- Made in the U.S.A.
Choosing a winch for your bumper
A winch on a front bumper adds recovery capability, but the winch and its mount work together as one system. Before choosing a winch, check its pull rating against the 10,500 lbs plate limit and keep the rated load at or below that figure. Consider the winch’s weight too, since a heavier unit puts more load on the bumper and the mounting points during recovery and rough trail use.
Recovery gear matters as much as the winch itself. Synthetic rope is lighter and easier to handle than steel cable, and a snatch block or a rated recovery strap can reduce strain on the winch. Check the fairlead, the hook and the mounting bolts regularly, and keep the wiring routed away from sharp edges and hot exhaust.
- Check the winch’s pull rating against the plate limit
- Use a line and hook rated for the load
- Recheck mounting bolts once the first trail outings are done
- Keep wiring away from sharp edges and heat
Specifications
| Brand | Addictive Desert Designs |
|---|---|
| Part number | F052932680103 |
| UPC | 700007176685 |
| Product type | Front winch bumper (Stealth) |
| Position | Front |
| Width | Full |
| Material | Steel |
| Tube wall thickness | .120 wall |
| Finish | Powder coat |
| Bumper color | Hammer black |
| Panel color | Satin black |
| Top mount | 40 inch light bar |
| Lower mount | 20 inch light bar |
| Side mount | Duallys x 4 |
| Winch plate limit | 10,500 lbs |
| Hardware | Stainless steel |
| Winch mount | Included |
| D-ring mount | Not included |
Vehicle fitment
It fits the 2009–2014 Ford F-150 in the FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, XL and XLT trims.
It is not for EcoBoost trucks and will not work with a lift kit. Model years before 2009 or after 2014 and Super Duty trucks are not covered. Check your truck’s year, model and trim against this list before you order.
Installation notes
This is a direct fit with no cutting or welding required. Because it will not work with a lift kit, plan the bumper before any suspension changes.
What’s included
- Stealth front bumper with integrated winch mount
- Stealth panels in Satin black
- Light mounts for the top, lower and side positions
- Stainless steel hardware
Not included: A winch, lights and D-ring mounts. Keep any winch at or under the 10,500 lbs plate limit.









