Overview
The ACCEL Performance Super Coil 140043 is an ignition coil with advanced bobbin technology and silicone magnetic steel cores, sold as a direct performance bolt-on upgrade. It replaces OE part number 12570616 and delivers 10-15% more energy than OEM coils.
Its windings use a turns ratio designed to send more power to the plugs. The epoxy-filled housing resists shock, vibration, chemicals and the engine bay environment.
Key features
- Advanced bobbin technology
- Silicone magnetic steel cores with optimized windings
- High temperature epoxy filled housing
- Direct performance bolt-on upgrade
- Brass secondary contacts and ACCEL yellow molded body
Ignition coil basics
An ignition coil steps up battery voltage to the level needed to jump the spark plug gap. Heat, vibration and moisture are the main stresses on a coil, which is why housing materials matter. A coil that is failing often causes misfires under load, a rough idle or hard starting when the engine is warm. Because a coil sits close to the engine block, its connector and mounting surface should be kept clean and dry.
When replacing a coil, inspect the spark plug boot and wire for cracks, corrosion or carbon tracking, since a worn plug wire can mimic a bad coil. Apply a small amount of dielectric grease to the coil boot if the design calls for it, and avoid over-tightening the mounting bolt. Test the new coil after installation by checking for smooth running and a clean start. If the symptoms return, check the plug and wire before replacing additional coils.
Specifications
| Brand | ACCEL |
|---|---|
| Part number | 140043 |
| UPC | 743047113516 |
| Part type | Super Coil ignition coil |
| OE part number | 12570616 |
| Cores | Silicone magnetic steel |
| Housing | High temperature epoxy filled |
| Secondary contacts | Brass |
| Body material | High dielectric strength material, ACCEL yellow |
| Energy output | Delivers 10-15% more energy than OEM coils |
Vehicle fitment
It carries a universal fit label. Use OE part number 12570616 to match it to your engine before ordering.
The OE reference is a practical way to match it, since it is a direct bolt-on upgrade. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a direct bolt-on upgrade. Check bracket, wiring and torque against your installation before starting. Disconnect the battery before replacing an ignition coil, and confirm the connector matches your existing coil.
What’s included
One ignition coil is described. No plug wires, brackets or hardware are named.
















