Select your vehicle

Replacement Headlights, Tail Lights & Bulbs

Replacement headlights, tail lights and bulbs for trucks, SUVs and Jeeps, including projector headlight sets, LED tail lights, halogen and xenon-style bulbs, LED conversion kits and round 7-inch units. Brands include Hella, Oracle Lighting, Spyder Auto Group, Anzo and Putco. Check each product page for bulb base, fitment and part number, then compare the products below.

Spyder Version 2 projector headlights with light bar DRL in black

Factory lights fade, crack and fog up, and on a trail rig they take branches and rocks too. This category covers what it takes to restore or upgrade the lights your vehicle needs to be road legal: headlight assemblies, tail and brake lights, marker lamps and the bulbs that go in them.

The parts split by how much you replace. A bulb is the quickest fix, as long as the base and filament count match. A complete assembly swaps the housing, lens and reflector together and usually plugs into the factory connector. Third brake lights, side markers and cab roof lights fill out the set. Note that some LED assemblies and roof light kits need separate wiring.

227Parts listed
20Brands
8Light types
12VBulb system voltage
7"Round headlight size
BA15s/BAY15dCommon bayonet bases

Shop replacement lights by type

Popular replacement lights

Bulb and lamp reference

Bulb numbers tell you the base and filament count, and lens codes tell you what a lamp is approved for. Wattages below are from the Hella listings in this category.

Miniature bulbs (Hella listings)

RatingBase
100312V 12WBA15s single contact
115612V 27WBA15s single contact
103412V 23/8W dual filamentBAY15d dual contact
115712V 27/8W dual filamentBAY15d dual contact
2821SB12V 3WSold as a 2-pack

Wedge bulbs

7440Single filament wedge
7443Dual filament wedge
3157Dual filament wedge, tail and turn
LED versions here7440, 7443 and 3157 in red, amber, white

Fitment notes from listings

  • Bronco 3rd brake light bracket raises the light to clear a 37" spare (2021-on)
  • XTune 3rd brake light 9037504 is not compatible with a backup camera
  • Recon cab roof lights for Silverado and Sierra 2500/3500; wiring kit separate
  • Poison Spyder 4" LED taillight kit for 2007-18 JK includes both side harnesses
  • Oracle 35W HID slim ballast is CAN-bus compatible

Headlight and fog bulb bases

FilamentsTypical use
H1SingleHigh beam, fog, projectors
H3SingleFog and auxiliary lamps
H11SingleLow beam or fog
9005 (HB3)SingleHigh beam
9006 (HB4)SingleLow beam
9007 (HB5)DualHigh and low in one bulb

Lens markings

DOTCertified to FMVSS 108 for road use
SAE AReflex reflector
SAE SStop lamp
SAE TTail lamp
SAE ITurn signal
SAE PParking lamp
SAE RBackup lamp

Color and lighting rules differ by state. Check that any replacement lamp is DOT marked before using it on the road.

All Replacement Headlights, Tail Lights & Bulbs 211 parts

Showing 1–12 of 211 resultsSorted by popularity

Types of lighting parts here

The category spans complete assemblies and individual bulbs. Assemblies include sealed or projector headlights, round 7-inch units, LED and halogen tail lights, third brake lights and side or roof markers. Bulbs range from basic incandescent types to halogen, xenon-style halogen and LED replacements. Mounting rings, harnesses and housings for round lamps appear as well.

Choosing a bulb or conversion kit

Start with the bulb base type, such as H7, H11, 9006 or 9012, listed in your owner's manual or on the existing bulb. A wrong base will not seat or lock correctly. LED conversions need more care than direct halogen swaps. A halogen housing has a reflector designed around a filament, so an LED with a poor beam pattern can scatter glare toward oncoming drivers. Projector housings usually control an LED more predictably than reflector housings.

  • Look for CAN bus compatibility or resistors if the vehicle flags bulb-out warnings.
  • Check that the LED driver or heat sink fits behind the housing.
  • Confirm the color temperature, since very blue light often reduces useful output in rain and fog.

Tail lights and brake lights

LED tail lights respond faster than filament bulbs and can use less power. Direct-fit sets plug into the factory connector, while universal units such as heated stop, tail and turn lights usually need a wiring harness. Verify lens color and the legal required functions on your vehicle, including stop, turn, tail and reverse.

Installation and aiming

Many bulb swaps are simple, but assemblies can require removing a grille or bumper cover. Disconnect the battery for wiring work, avoid touching halogen glass with bare fingers, and seal housings correctly to prevent moisture. After installing new headlights, re-aim them so the beam cutoff is correct. Lighting equipment rules, color restrictions and DOT or SAE marking requirements vary by state, so check local regulations. Confirm fitment for your exact year, make and model.

Before buying, compare housing style, lens color, bulb base and connector type across the listings. Keep the old assemblies until the new lights are confirmed working, and check that both sides match in color and brightness after a few weeks of use, since mixed ages of bulbs can look uneven.

Common mistakes to avoid

One mistake is buying a bulb by color alone. Two bulbs with the same base can have different wattage and heat output, and a high-wattage replacement can melt a connector or housing designed for lower power. Another is skipping the aim adjustment, which leaves new lights pointing too high or too low. Check aim against a wall at a measured distance, with the vehicle parked on level ground and at normal load.

Moisture is a frequent failure cause. Leave vent caps open and reseal the back of a housing carefully, and replace worn gaskets rather than reusing them. Put a thin layer of dielectric grease on connectors to resist corrosion, which also helps tail light sockets that have turned green. If a light flickers, check the ground connection before replacing the unit.

Finally, keep in mind that headlights lose clarity with age. A cloudy lens may only need polishing and a UV sealant, not replacement.

Popular Replacement Headlights, Tail Lights & Bulbs brands

Replacement Headlights, Tail Lights & Bulbs FAQ

How do I find my headlight bulb size?

Check the owner's manual, look for the number stamped on the base of the existing bulb, or consult the manufacturer's specifications for your year, make and model. High and low beams may use different bulb types.

Can I put LED bulbs in halogen headlights?

Many people do, but results vary. Halogen reflectors are designed for a filament, so some LED bulbs create glare and a poor beam pattern. Projector housings generally work better, and the beam should be re-aimed after installation.

Why does my vehicle show a bulb-out warning with LEDs?

LEDs draw less current than incandescent bulbs, so the vehicle's monitoring may read a fault. Load resistors or CAN bus compatible bulbs are the usual fix, depending on your vehicle.

Are replacement tail lights legal?

Rules differ by state. Generally lights need the correct colors, brightness and functions and often DOT or SAE markings. Check your local regulations before replacing factory lights with aftermarket designs.