Overview
The Crown Automotive 12VST wiper motor kit replaces vacuum-type wiper systems on Willys MB and Jeep CJ-2, CJ-3, CJ-5 and CJ-6 models. It includes a stainless steel motor, arm, blade and wiring for a toggle switch.
The wiring is prepared for a toggle switch. Plan the switch location and source one separately if it is needed for your setup.
Key features
- Replaces vacuum-type wiper setups
- Stainless steel motor
- Arm and blade included
- Wiring for a toggle switch
Wiring and switch placement
Wiper motor kits for older Willys and CJ vehicles depend on a clean electrical path from the switch to the motor. Before cutting or splicing anything, trace the wire routing and decide where the switch will sit so it is easy to reach from the driver’s seat. A switch mounted in a dry, protected spot lasts longer than one exposed to spray and dust.
Plan the mounting of the motor and arm before routing the wiring, so the cables are not pulled tight when the arm sweeps. Use weatherproof connectors where wires join, and secure loose wire so it cannot catch on moving parts. Check the arm and blade alignment after installation, and make sure the wiper parks correctly before the first real use.
- Trace wire routing before cutting
- Mount the switch within easy reach
- Use weatherproof connectors at joins
- Confirm the wiper parks correctly
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 12VST |
| UPC | 848399027228 |
| Motor material | Stainless steel |
| Replaces | Vacuum-type wiper |
| Included | Motor, arm, blade and toggle switch wiring |
Vehicle fitment
It fits the 1941–1943 Willys MB (Base), 1946–1949 Willys CJ-2, 1949–1952 and 1954–1958 Willys CJ-3, 1955–1958 CJ-5 and 1956–1958 CJ-6.
Vehicles outside those years, including Wrangler models and the CJ-7, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The wiring is set up for a toggle switch, so decide where the switch will mount before wiring. Disconnect the battery before working on the electrical connections.
What’s included
The kit includes the stainless steel motor, arm and blade, with wiring for a toggle switch. Plan a toggle switch location before wiring.









