Overview
The Crown Automotive 12V windshield wiper motor is a 12-volt replacement kit for Willys MB and Jeep CJ-2, CJ-3, CJ-5 and CJ-6 models. It replaces the factory wiper setup and includes the motor, arm and blade.
The fitment covers the early CJ and Willys models from 1941 to 1958. Confirm fit for your vehicle’s year, model and trim before ordering for any later CJ-7 or Wrangler.
Key features
- 12-volt system
- Replaces the factory setup
- Includes motor, arm and blade
- Crown Automotive part number 12V
How the 12-volt wiper motor works
A wiper motor converts electrical power into the sweeping motion of the arm. In a 12-volt setup, the motor draws current through the wiper switch, fuse and ground, so weak connections or a corroded ground can slow the sweep even when the motor itself is sound.
When replacing an older motor, check the arm pivot, the linkage and the blade condition. A new motor will not perform well if the arm sticks or the blade rubber has hardened, so clear those first.
Keep the park position in mind during installation, since the arm should stop at the bottom of the glass when the switch is off.
- Check fuse and ground first
- Clean and lubricate arm pivots
- Inspect blade rubber for cracking
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 12V |
| UPC | 848399027211 |
| Voltage | 12-volt |
| Included | Motor, arm and blade |
| Setup | Replaces factory setup |
Vehicle fitment
It fits the 1946–1949 Jeep Willys CJ-2, the 1949–1952 and 1954–1958 Willys CJ-3, the 1955–1958 Willys CJ-5, the 1956–1958 Willys CJ-6 and the 1941–1942 Willys MB (Base).
Fit is confirmed only for the models and years named above. The 1976–1986 Jeep CJ7 and Wrangler models are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Motor, arm and blade are included with the kit.









