Overview
The Welcome Distributing Brake Light Bracket, part number 1011, is a fixed third brake light bracket for Jeep Wrangler models that carry a swing-out tire carrier. Removing the spare from the tailgate takes the factory third brake light and its bracket with it, and this bracket replaces that setup.
It fits 1987–1995 Wrangler YJ, 1997–2006 Wrangler TJ, 2004–2006 Wrangler LJ and 2007–2016 Wrangler JK models, in two- and four-door versions. The bracket has a black powder coated finish and mounts with the factory bolts.
Key features
- Fixed bracket that replaces the factory third brake light mount
- Includes a red LED light
- Mounts with the factory bolts, with no drilling
- Black powder coated finish
- Made from 1/4 inch aluminum
- Works with tires up to 34 inches
- Made in the USA
Before you buy
A third brake light bracket sits high on the tailgate, where it is easy to knock or snag when the spare is swung open. Mounting it cleanly matters because the wiring runs through the tailgate harness, and a loose connection is a common cause of a dead light. Before installing, look over the tailgate hinges and the spare tire mount for worn bolts or cracked welds, since the weight of a spare sits on the same structure.
Once the bracket is fitted, check the light at night and in daylight, with the brakes applied and with each turn signal, since a faint or flickering lamp is easy to miss from the driver’s seat. Keep the lens clean and inspect the powder coat for chips, which can start rust on the aluminum over time. If you later add a larger spare or a different carrier, recheck clearance so the lamp and the tire do not interfere when the tailgate opens.
- Inspect tailgate hinges and spare mount bolts before fitting
- Test brake and turn signal function after installation
- Touch up powder coat chips to slow corrosion
- Recheck clearance after any change to spare tire size
Specifications
| Brand | Welcome Distributing |
|---|---|
| Part number | 1011 |
| UPC | 857131005073 |
| Material | 1/4 inch aluminum |
| Finish | Black powder coated |
| Light | Red LED, included |
| Mounting | Factory bolts, no drilling |
| Tire clearance | Tires up to 34 inches |
| Body style | 2 and 4-door models |
| Made in | USA |
Vehicle fitment
It fits the 1987–1995 Wrangler YJ (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport), the 1997–2006 Wrangler TJ (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X), the 2004–2006 Wrangler LJ (Unlimited, Unlimited Rubicon) and the 2007–2016 Wrangler JK (including Rubicon, Sahara, Sport, Sport S, X and Unlimited trims).
The list does not show 2017 Wrangler models, or Jeep JL, JT, Cherokee or Grand Cherokee vehicles. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting uses the factory bolts and needs no drilling. Check that the red LED light works with your brake and turn signals once the bracket is in place.
What’s included
The fixed brake light bracket with its red LED light, part number 1011.




















