Overview
The Welcome Distributing Brake Light Bracket, part number 1013, is a third brake light bracket for Jeep Wrangler owners who run a swing-out tire carrier. It replaces the factory bracket that comes off when the spare is moved to the tailgate. It mounts in a fixed position, so match the mounting style to your carrier before installing.
It works with tires up to 40 inches and is made from 1/4 inch aluminum with a black powdercoated finish. It fits 1987–1995 YJ, 1997–2006 TJ, 2004–2006 LJ and 2007–2016 JK Wrangler models.
Key features
- Brake light bracket for swing-out tire carrier setups
- Works with tires up to 40 inches
- Includes a red LED light
- Uses the factory bolts, with no drilling
- Black powdercoated 1/4 inch aluminum
- Suitable for two- and four-door models
Choosing the right setup
Swing-out carriers change how a third brake light bracket has to sit, because the spare moves the lamp and its wiring with it. Before settling on a mount, look at how the carrier attaches to the tailgate and whether its arm clears the lamp when the door opens. Loose or rubbing wiring is a common cause of a dim or flickering brake light, so route the harness with clips and keep it away from the hinge.
When the spare is heavier or wider than stock, the bracket and the tailgate hinge take more load, so check the bolts after the first few drives. Look for cracks around the mounting holes, rust creeping under the coating, and moisture inside the lens. Replacing a worn bracket early is simpler than tracking down an intermittent lamp later.
- Check how the carrier arm clears the lamp
- Route the harness away from the tailgate hinge
- Look for cracks around the mounting holes
Specifications
| Brand | Welcome Distributing |
|---|---|
| Part number | 1013 |
| UPC | 857131005097 |
| Material | 1/4 inch aluminum |
| Finish | Black powdercoated |
| Light | Red LED, included |
| Mounting | Factory bolts, no drilling |
| Tire clearance | Tires up to 40 inches |
| Body style | 2 and 4-door models |
| Made in | U.S.A. |
Vehicle fitment
The manufacturer list covers the 1987–1995 Wrangler YJ, 1997–2006 Wrangler TJ, 2004–2006 Wrangler LJ and 2007–2016 Wrangler JK, with each generation’s trims named in the list, including Rubicon, Sahara, Sport and Unlimited.
Vehicles from 2017 onward and Jeep JL, JT, Cherokee and Grand Cherokee are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket uses the factory bolts and needs no drilling. Once it is in place, test the red LED light with the brake pedal and the turn signals.
What’s included
The brake light bracket with its red LED light, part number 1013.














