Overview
The Wavian JC0010RVS is a 2 gallon steel gas can with an attached safety spout, a jerry can for carrying gasoline. It is built to military jerry can standards and includes an adapter for vehicles with smaller filler receivers. It is a universal fit for anyone carrying extra fuel.
The body is 0.9mm cold rolled steel (DC 04 EN 10130) in dual pan construction with seam welded joints. Each can is painted inside and outside, and the interior has a fuel resistant Rezol enamel lining to prevent rust. It is manufactured and tested to comply with DIN 7274, BAM GGR001, Australian Standard AS 2906, German Standard TUV/GS and Swedish Standard-SP, and it holds UN dangerous goods approval.
Key features
- Full internal breather pipe with a wide channel breather for splash-proof, smoother pouring
- Three handle configuration for carrying
- Leakproof bayonet closure with a locking pin in the cap
- Strengthened cap hinge that resists accidental bending when the cap is closed
- Cap holds open while the can is discharging
- Painted exterior with epoxy polyester powder coat
- Safety spout attached and adapter for smaller filler receivers
Storing and transporting fuel
A steel gas can for gasoline should be stored upright, in a well ventilated area, and away from heat, sparks and direct sunlight. Keep the cap closed and the spout seated during transport, and make sure the can is strapped or wedged so it cannot tip or roll. Fill it outdoors or in a shaded spot where spilled fuel can evaporate safely.
Over time the seams, cap hinge and spout gasket are the parts most likely to wear. Inspect them before each trip and replace the spout or gasket if they show cracks or seepage. Dispose of old fuel properly rather than mixing it with fresh fuel.
- Store upright and away from heat
- Inspect the spout gasket before each trip
- Clean spills and dispose of old fuel properly
Specifications
| Brand | Wavian |
|---|---|
| Part number | JC0010RVS |
| UPC | 856460005051 |
| Can size | 2 gallon |
| Fluid type | Gasoline |
| Body material | 0.9mm cold rolled steel (DC 04 EN 10130) |
| Construction | Dual pan, seam welded |
| Exterior finish | Epoxy polyester powder coat |
| Interior lining | Fuel resistant Rezol enamel |
| Standards | DIN 7274, BAM GGR001, Australian Standard AS 2906, German Standard TUV/GS, Swedish Standard-SP, UN dangerous goods approval |
Vehicle fitment
This gas can is a universal fit and is not built for a particular make, model or year. Vehicles with smaller filler receivers can use the included adapter, so check that your filler opening takes the spout before pouring.
What’s included
The can comes with a safety spout attached and an adapter for vehicles with smaller filler receivers.









