Overview
The Warrior HL93109 is a rear tailgate strut, a gas spring that lifts and holds the tailgate open on Jeep Wrangler JK models. It is suited to both 2-door and 4-door vehicles and fits 2007 to 2018 Wrangler (JK) models, including the Unlimited versions.
A gas strut takes over the job of holding the tailgate up while you load gear. The strut swings the tailgate open on its own and keeps it from swinging back unexpectedly. Light inward pressure closes the tailgate, with no release to push.
Key features
- Gas-assisted opening that holds the tailgate open
- Controlled swing that avoids unexpected closing
- Closes with slight inward pressure and no release
- Suited to 2-door and 4-door Wrangler models
- Mounting hardware included
- Instructions included with a limited lifetime warranty
Gas struts and tailgate safety
A gas spring works by pressurized gas in a sealed tube, so it can lose force slowly as seals age. A failing strut may let the tailgate drop, or it may hold it open at a tilt. Replacing both struts together keeps the lift even and avoids uneven loads on the hinge and latch.
Keep bystanders and loose cargo clear while the tailgate swings. Make sure the strut ends are fully seated on their ball studs before loading, and check the bracket for bends after a hard impact. Keep the latch and seals clean so the door closes evenly. A cracked or leaking strut should be replaced rather than repaired.
- Replace struts in pairs
- Seat both ends fully before loading
- Check brackets after impacts
Specifications
| Brand | Warrior |
|---|---|
| Part number | HL93109 |
| UPC | 634146931098 |
| Product type | Rear tailgate strut (gas spring) |
| Body style | 2-door and 4-door models |
| Mounting hardware | Included |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler (JK), including the Sport, Sport S, Sahara, Rubicon, 70th Anniversary and 75th Anniversary trims and the Unlimited versions of each.
The fitment does not cover the TJ, LJ or JL Wrangler generations or the Gladiator. Check your model year and body style against the trims above.
Installation notes
Mounting hardware is included, so no separate brackets are needed. Gas struts are under pressure: keep hands and tools clear of the rod end while removing or fitting the strut, and support the tailgate while you work.
What’s included
The package includes the tailgate strut, mounting hardware and instructions. Confirm the package contents before starting, including the number of struts supplied.









