Overview
The Warn Industrial Wire Rope Tension Kit, product number 31150, is a tensioner built for Warn Industrial winches that have an 8-inch drum. Its job is to keep wire rope from tangling while the drum is free spooling and to help the cable wind uniformly.
Because the kit serves the winch rather than the vehicle, the winch model and drum size decide whether it is the right match. It is made for Warn Industrial winches only.
Key features
- Reduces wire rope tangling when the drum free spools
- Supports uniform wire rope spooling
- Designed for quick and easy installation
- Sized for 8-inch drums
Using a spooling aid
Wire rope tangling usually happens when the drum is free spooling and the cable is pulled out or released without tension. A spooling aid guides the rope back onto the drum so the wraps stay even and do not pile up on one side. Keep the rope under light load when winding back in, and watch the first few layers closely.
Winch drums vary in diameter and flange height, so the drum size should be confirmed before any spooling accessory is chosen. Inspect the cable for kinks, broken strands or flattened sections, since damaged rope can snag even with a guide in place. Replace worn rope before it causes a fault in the winch.
- Keep fingers clear of the cable
- Inspect rope for broken strands
- Wind under light tension
Specifications
| Brand | Warn |
|---|---|
| Part number | 31150 |
| UPC | 1274831150 |
| Drum size | 8-inch |
| Compatible winches | Warn Industrial winches only |
Vehicle fitment
No vehicle is tied to this kit. The fit is set by the winch: Warn Industrial winches with an 8-inch drum.
Compare the drum diameter on your winch against the 8-inch rating. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the drum is 8 inches before starting, and keep fingers away from the cable while the kit is fitted.
What’s included
Check the components against your winch setup before ordering.












