Overview
The Warn rear quick connect kit, part number 32963, is a connection kit for rear mounted portable winches. It provides a 20’/6m connection for the rear of the vehicle and includes a power interrupt kit.
Wiring a rear winch connection
A rear quick connect kit gives a portable winch a convenient plug point at the back of the vehicle, so the winch can be moved between mounts without rewiring each time. The connection carries heavy current, so the cable run, terminals and grounds deserve the same attention as the winch itself.
Route the cable away from exhaust heat, moving suspension parts and sharp edges. Use protective loom or grommets where the cable passes through body panels, and keep the run short enough that voltage does not drop under load. Secure the connector so it does not swing or pull free on rough trails.
Check the connection after each use. Look for corroded terminals, chafed insulation and loose fasteners, and clean and tighten them as needed. Keep the plug cap in place when the winch is not in use, so dirt and water stay out of the contacts.
Specifications
| Brand | Warn |
|---|---|
| Part number | 32963 |
| UPC | 12748329633 |
| Connection length | 20’/6m |
| Use | Rear mounted portable winches |
| Included | Power interrupt kit |
Vehicle fitment
It is made for rear mounted portable winches, so match it to your winch setup before ordering. Confirm fit for your vehicle’s year, model and trim as well.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This kit involves winch power wiring, so use proper fusing for the circuit and follow a clear wiring plan before connecting.
What’s included
The kit includes a power interrupt kit. Check any other needed parts against your installation before starting.












