Overview
The Westin Ultimate LED Bull Bar, part number 32-3605L, is a front bull bar with a built-in 20-inch combo beam LED light bar for the 2010–2018 Toyota 4Runner. It combines grille protection with forward lighting.
The bull bar is made of three-inch tube and finished in textured black. The LED light bar draws 2.80 amps at 12 volts and is rated 45 watts, with 4050 raw lumens and a face size of 20.5 inches.
Key features
- Built-in 20-inch combo beam LED light bar
- Light bar uses 215 Osram LEDs rated at 3 watts each
- 45W output with 4050 raw lumens
- Wiring harness included
- three-inch tube with molded transition bushings
- Removable brushed stainless steel skid plate
- Clean-cut opening with weather strip seal
Wiring and lighting upkeep
A built-in light bar puts electrical load into the front of the truck, so the wiring should be routed cleanly and protected from heat and moisture. Keep connectors sealed and fused as the wiring instructions direct, and check that the harness is not pinched when the hood closes. Loose or corroded connections are a common cause of flickering lights.
The removable skid plate makes it easier to clean the area behind the light bar and inspect the mounts. After rough trail use, look over the brackets and bushings for cracks or wear. Clean the lens regularly, since road grime reduces light output and can cause uneven beam patterns.
- Route wiring away from heat and moving parts
- Keep connectors sealed and dry
- Inspect brackets and bushings after rough use
- Clean the lens regularly
Specifications
| Brand | Westin |
|---|---|
| Part number | 32-3605L |
| UPC | 707742079935 |
| Product type | Front bull bar with LED light bar |
| Tube diameter | three-inch |
| Finish | Textured black |
| Light bar | 20-inch combo beam |
| Beam type | Combo |
| Power output | 45W |
| LED count | 215 Osram LEDs, 3W each |
| Raw lumens | 4050 |
| Amp draw | 2.80 A at 12V |
| Position | Front |
Vehicle fitment
The manufacturer fitment list covers the 2010–2018 Toyota 4Runner. The bar mounts to the front of the 4Runner using the included mount kit and transition bushings.
It fits the 2010–2018 Toyota 4Runner. It does not fit the Tacoma or other Toyota models. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes a mount kit, molded transition bushings and a wiring harness for the light bar. The opening is clean-cut and sealed with a weather strip.
What’s included
The kit includes the bull bar, the 20-inch combo beam LED light bar, the wiring harness, the mount kit with transition bushings and the removable skid plate.









