Overview
The Westin Ultimate LED Bull Bar, part number 32-3885L, is a front bull bar with a 20-inch combo beam LED light bar for the 2016–2018 Toyota Tacoma. It pairs grille protection with a built-in forward light bar.
The bar is built from three-inch tube with a textured black finish. The light bar is rated 45 watts, produces 4050 raw lumens, and draws 2.80 amps at 12 volts. Its face measures 20.5 inches.
Key features
- 20-inch combo beam LED light bar built in
- 215 Osram LEDs at 3 watts each
- 45W output and 4050 raw lumens
- Wiring harness and mount kit included
- three-inch tube with molded transition bushings
- Removable brushed stainless steel skid plate
Tacoma front-end upgrades
A front bull bar on a Tacoma changes the truck’s approach and how it handles light brush or animal strikes. Before installing, check that the bar clears the radiator, bumper cover and any front sensors. A test fit of the mounts and bushings helps confirm that the opening lines up cleanly before final tightening.
The removable skid plate can be taken off to clean the area or to inspect the frame and mounts. Keep an eye on the fasteners after trail use, since rough ground can loosen bolts. Careful wiring routing also helps keep the light bar’s connections dry and secure.
- Check clearance at the radiator and bumper cover
- Test fit the mounts before final tightening
- Remove the skid plate to inspect the mounts
- Re-check fasteners after rough trail use
Specifications
| Brand | Westin |
|---|---|
| Part number | 32-3885L |
| UPC | 707742079874 |
| Product type | Front bull bar with LED light bar |
| Tube diameter | three-inch |
| Finish | Textured black |
| Beam type | Combo |
| Power output | 45W |
| LED count | 215 Osram LEDs, 3W each |
| Raw lumens | 4050 |
| Amp draw | 2.80 A at 12V |
| Face size | 20.5 inches |
| Position | Front |
Vehicle fitment
It fits the 2016–2018 Toyota Tacoma. The bar is designed for a direct-fit installation at the front.
It does not fit the 2010–2018 Toyota 4Runner or the 2005–2015 Tacoma. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The mount kit, molded transition bushings and wiring harness come with the bar. A weather strip seals the clean-cut opening.
What’s included
The kit includes the bull bar, the 20-inch combo beam LED light bar, the wiring harness, the mount kit and the removable skid plate.









