Overview
The Westin Ultimate LED Bull Bar 32-3900L is a chrome front grille guard with a built-in 20 in combo beam LED light bar for the 2017-2019 Ford F-250 and F-350 Super Duty. It is made from 3 in tube with molded transition bushings.
The bar includes a mount kit and a wiring harness. The LED light bar produces 4050 raw lumens with a 45W power output and uses 215 x 3w Osram LEDs. Other features include a clean cut opening with a weather strip seal and a removable brushed stainless steel skid plate.
Key features
- Grille guard with an integrated 20 in combo beam LED light bar
- Made of 3 in tube
- Molded transition bushings
- Mount kit included
- Wiring harness included
- Clean cut opening with weather strip seal
- Removable brushed stainless steel skid plate
- Westin logo
- Chrome plating (the series is also offered in textured black powder coat)
Choosing a light bar setup
An LED light bar mounted in a bull bar adds forward lighting for off-road use, but it sits at the front of the truck where it can take debris and water. Light output affects how far the beam reaches, so a combo pattern suits trail speeds. Check that the bar stays aimed after rough driving, and use a fused relay to protect the truck’s electrical system.
Chrome plating shows scratches more readily than powder coat, so inspect the finish after brush contact and touch up chips to limit corrosion. Re-check the mount bolts and harness connectors after the first few trips off pavement, and keep the skid plate fastened when it is installed.
- Aim the light bar after the first few trips
- Inspect the wiring for chafing near the grille
- Keep the skid plate hardware tight
Specifications
| Brand | Westin |
|---|---|
| Part number | 32-3900L |
| UPC | 707742081648 |
| Product type | Grille guard (bull bar) with LED light bar |
| Position | Front |
| Finish | Chrome |
| Tube diameter | 3 in. |
| Light bar | 20 in combo beam LED |
| LEDs | 215 x 3w Osram |
| Power output | 45W |
| Face size | 20.5 in. |
| Amp draw | 2.80 at 12v |
| Brightness | 4050 raw lumens |
| Beam type | Combo |
| Skid plate | Removable, brushed stainless steel |
| Fit type | Direct fit |
| Manufacturer part code | WES32-3900L |
Vehicle fitment
The 32-3900L fits the 2017–2019 Ford F-250 Super Duty (King Ranch, Lariat, Limited, Platinum, XL, XLT) and the 2017–2019 Ford F-350 Super Duty (King Ranch, Lariat, Limited, Platinum, XL, XLT).
It covers the 2017-2019 F-250 and F-350 Super Duty only. Earlier and later Super Duty years and other Ford trucks are not covered. Match your vehicle’s year, model and trim before ordering.
Installation notes
Mount the grille guard to the vehicle’s frame or bumper area and follow the torque specifications for the mounting hardware. Check clearance around radar or sensors. Wire the light bar through a fused relay with connectors rated for its current, and disconnect the battery during the work. Route the harness clear of the engine and steering. Local rules may restrict LED bars on public roads.
What’s included
- Grille guard with integrated 20 in combo beam LED light bar
- Mount kit
- Wiring harness
- Molded transition bushings
- Removable brushed stainless steel skid plate









