Overview
The TruXedo Lo Pro QT, part number TRX500901, is a low-profile soft roll-up tonneau cover for the 2009–2010 Hummer H3T in the Alpha and Base trims. It is built to come off and go back on easily, which suits owners who haul oversized cargo or ATVs in the bed.
Angled side rails sit less than 1 inch above the truck bed, and the aerodynamic styling can improve gas mileage. The cover moves from fully closed to fully open in 20 seconds, giving complete access to the bed. Corner seals and a weather seal on all four sides help keep the elements out.
Key features
- Angled side rails that sit less than 1 inch above the bed for a low, sleek profile
- Removable design, with re-installation in about 5 minutes
- Velcro brand loop 1 inch wide along the full length of the bed rail, with a floating hook that moves on the rail
- Tension control system that keeps the cover tight when closed
- Corner seals and a weather seal on all four sides
- Works with bed rails, bed liners and rail caps
Choosing a cover for hauling
Covers that come off easily are often chosen by owners who alternate between daily driving and hauling bulky loads. A removable soft cover gives the bed full clearance when needed, but it also means the cover is handled more often. Lay it out clean and dry when it is off, and avoid folding it into tight creases that can stress the fabric.
Velcro fastening is simple to use but depends on a clean, flat contact surface. Brush dust and grit off the loop before reinstalling, and make sure the hook sits evenly on the rail. Uneven seating can cause the cover to shift on the road. Owners who carry tools or heavy gear in the bed should also consider where those items sit relative to the cover edges.
- Store the cover dry and unfolded when it is off the truck
- Clean the Velcro loop before each reinstall
- Recheck the fit after the first short drive
Specifications
| Brand | TruXedo |
|---|---|
| Part number | TRX500901 |
| Material | Soft |
| Tonneau type | Roll-up |
| Operation | Manual |
| Side rail height | Less than 1 inch above the truck bed |
| Velcro loop width | 1 inch |
| Closed to open time | 20 seconds |
| Re-installation time | About 5 minutes |
| Rack compatible | No |
| Toolbox compatible | No |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2009–2010 Hummer H3T in the Alpha and Base trims. Other Hummer models and model years are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Re-installation takes about 5 minutes, and the Velcro fastening runs the full length of the bed rail.
What’s included
Check the package contents against your installation before starting.
Not included: Rack or toolbox accessories, since the cover is not compatible with either.









