Overview
The Crown Automotive 5175583AB is a thermostat and housing for the 2007 to 2009 Jeep Grand Cherokee (WK) with the 3.0L turbo diesel engine. The thermostat has a 180 degree temperature rating.
Crown Automotive has made replacement parts for Jeep vehicles for over 50 years, with more than 8,000 part numbers, many for factory-discontinued items.
Key features
- Thermostat and housing
- For vehicles with the 3.0L turbo diesel
- 180 degree temperature rating
- Direct fit
- Replacement part for Jeep vehicles
Cooling system checks
A thermostat controls when coolant begins to flow to the radiator, so a unit stuck closed lets the engine run hot, while one stuck open keeps it running cool and can reduce heater output. Symptoms of a failing thermostat include temperature gauge swings, slow warm-up and coolant leaks around the housing. Diesel engines depend on steady cooling for combustion, so catching a fault early helps avoid bigger repairs.
When replacing the thermostat, renew the gasket or seal at the housing, and clean both mating surfaces before assembly. Check the radiator cap and hoses for wear at the same time, since a weak cap can cause boiling even with a new thermostat. Top up with the correct coolant, run the engine to temperature and check the gauge and the housing for seepage.
- Renew the housing gasket or seal
- Inspect the radiator cap and hoses
- Check the coolant level after the first drive
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5175583AB (CRO5175583AB) |
| UPC | 848399085297 |
| Part type | Thermostat and housing |
| Temperature rating | 180 degrees |
| Engine | 3.0L turbo diesel |
| Fit type | Direct fit |
Vehicle fitment
The 5175583AB fits the 2007 to 2009 Jeep Grand Cherokee (WK) in Laredo, Limited and Overland trims, with the 3.0L turbo diesel. Use part number 5175583AB and the UPC, where one is given, to confirm you have the same item, since parts from the same maker can differ by vehicle, year or position. Compare the year, trim and engine on your vehicle with these details before ordering.
Other engines, Grand Cherokee years and the WJ generation are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Let the engine cool completely before opening the cooling system, and use the correct coolant for the engine. Bleed air from the cooling system, then check for leaks and the coolant level after the first drive. Keep the part number with your records, and inspect the part and its fasteners periodically, especially after off-road use. Gather the tools and fasteners needed before starting, and work in a clean, well-lit area.
What’s included
- Thermostat and housing
