Overview
The TeraFlex Spare Tire Carrier Relocation Bracket 4904200 is a slim mount for the Jeep Wrangler JK that moves the spare tire up 1.5 inch. The bracket fits a 35 inch tire into the tire well at the rear bumper and fits 2007-2015 Jeep Wrangler JK models.
A spare that sits low on the factory tailgate bracket can hit the bumper when a larger tire is mounted. The slim design adds clearance without a bulky carrier, which suits owners who need the spare set higher on the tailgate. Tires over 35 inch are not recommended for the factory tailgate bracket.
Key features
- Slim mount design for spare tire relocation
- Moves the spare tire up 1.5 inch
- Fits a 35 inch tire into the tire well at the bumper
- It fits 2-door and 4-door models.
- Direct fit listing on the manufacturer fitment list
Before mounting a larger spare
A larger spare changes more than tire clearance. Once the carrier sits higher on the tailgate, the hinges, latch and tailgate seal carry a different load. After installation, close the tailgate slowly and confirm it latches square without force. Watch for rubbing against the body or bumper at full steering lock and when the suspension flexes over rough ground.
Tire weight matters as much as diameter. A heavier spare adds stress to the mounting points, so check bolts and welds periodically, especially after trail use. Re-torque the fasteners after the first few drives and look for hairline cracks around the bracket. Keep the spare secured tightly so it cannot shift and strike the glass. Keep it inflated to the pressure marked on its sidewall, since an underinflated tire can sag toward the bumper.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4904200 |
| UPC | 843885006169 |
| Spare tire movement | Up 1.5 inch |
| Maximum recommended tire size | 35 inch |
| Mount type | Slim mount |
Vehicle fitment
The manufacturer fitment list covers 2007-2015 Jeep Wrangler (JK) models. Check the year and model against your vehicle before fitting.
It fits 2007-2015 Jeep Wrangler JK models. 2016 through 2018 JK models, and TJ, YJ, LJ and JL Wranglers, are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Brake light extension or modification may be necessary with this bracket, using Part 4997210 or Part 4997120. Wire any relocated brake light to fused power and confirm it meets local road-use rules before driving.
What’s included
The kit is the slim mount bracket only, with no fasteners or other hardware included.
Not included: Brake light extension parts 4997210 or 4997120, which may be needed for this bracket.









