Overview
The Smittybilt Tire Relocation Bracket, part 3721, lets a tire up to 35 inches clear the vehicle without a separate tire carrier. It installs directly to the factory tire mounting points.
The bracket is manufactured from 1/4-inch plate and finished in Smittybilt’s two-stage matte black powder coat.
Key features
- Clears tires up to 35 inches
- Installs to the factory tire mounting points
- Made from 1/4-inch plate
- Two-stage matte black powder coat finish
Spare tire placement
A tire relocation bracket moves the spare off the rear of the vehicle, freeing cargo space and reducing the swing of the tire on the hitch or door. Heavier tires change the load on the factory mounting points, so the bracket works best when those points are solid and the fasteners are tight.
Tire size and weight matter when mounting high on the vehicle. A larger tire raises the center of gravity and adds load to the mounts during braking and cornering, so check fasteners before each trip and watch for flex or shifting. Keep the spare inflated to the same pressure as the others for consistent handling.
Inspect the bracket after off-road use. Look for cracks at welds, loose mounting bolts and coating scraped to bare metal. Touch up exposed steel with primer and matching paint to slow rust, and clean mud from the mounting surfaces so the bracket seats flat.
- Check factory mounts before each trip
- Inspect welds after rough trail use
- Keep the spare inflated to match the others
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 3721 |
| UPC | 631410104318 |
| Type | Tire relocation bracket |
| Material | 1/4-inch plate |
| Maximum tire size | 35 inches |
| Finish | Textured black, two-stage matte black powder coat |
Vehicle fitment
The bracket is a direct-fit part for the factory tire mounting points. Confirm it matches your vehicle’s tire mounting points before ordering.
What’s included
The bracket is sold as a single mounting part.














