Overview
The T-Rex Grilles 20965 is a polished aluminum billet grille insert for the 2014–2017 Toyota Tundra. It sits in the main opening in a horizontal pattern and is designed for the area without the OE logo recessed area, so it works as a replacement for the factory insert.
The insert is cut from T-5 or T-6 billet aluminum rather than extruded aluminum. The surface is polished in three stages, cleaned, and then given a glossy powder-coat. The process takes place at the Southern California manufacturing facility, and the insert is a direct fit for the Tundra trims below.
Key features
- Billet aluminum construction using T-5 or T-6 stock
- Polished aluminum finish under a glossy powder-coat
- Horizontal pattern for the main grille opening
- Designed for the main opening without the OE logo recessed area
- Replacement insert with a direct fit listing
- Three-stage polishing and cleaning before the coating is applied
Replacing the factory insert
Replacing the factory insert is mostly a matter of careful removal and clean fitting. Before pulling the original out, note how the clips and tabs engage so the new insert seats the same way. Inspect each clip for cracks, since a broken one can leave the new piece loose or uneven.
Keep the old insert until the new one is fitted and checked. Store it out of direct sun so the plastic parts stay in good condition in case you need to return to the original. Once the new insert is in, check the gaps around the edges and the fit against the bumper, then recheck the fasteners after the first few drives.
- Note the clip layout before removing the old insert
- Inspect clips for cracks
- Check edge gaps against the bumper after fitting
Specifications
| Brand | T-Rex Grilles |
|---|---|
| Part number | 20965 |
| UPC | 609579024068 |
| Material | Billet aluminum (T-5 or T-6 stock, per manufacturer) |
| Finish | Polished aluminum with glossy powder-coat |
| Orientation | Horizontal |
| Opening | Main, without OE logo recessed area |
| Type | Replacement billet grille insert |
| Quantity | 1 pc. |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2014–2017 Toyota Tundra in the 1794 Edition, Limited, Platinum, SR, SR5 and TRD Pro trims.
It fits the 2014–2017 Toyota Tundra in 1794 Edition, Limited, Platinum, SR, SR5 and TRD Pro trims. Tundra years outside 2014–2017 and other Toyota models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bolt-on design needs fewer tools and no cutting. Because the insert replaces the factory piece, remove the original before mounting the new one.
What’s included
One billet grille insert, one piece. Check the package contents against your installation before starting, including any mounting hardware you need.









