Overview
The Hypertech Speedometer/Odometer Recalibration Device is an inline speedometer calibrator for correcting readings on 28-40 in. tires. It recalibrates speedometer and odometer readings for that tire size and installs with factory-style connectors, without splicing wires.
Key features
- Inline design
- Factory-style connectors for installation without splicing
- Speedometer correction for 28-40 in. tires
Tire size and speedometer accuracy
Tire diameter has a direct effect on speedometer and odometer readings. A larger or smaller tire changes how far the vehicle travels per revolution, so the displayed speed and distance drift from actual values. An inline recalibration device adjusts that signal so the readings line up with the new tire size, which is why the tire diameter should be measured before choosing a device.
Recheck the readings after any tire change, whether you move to a new size or replace worn tires with the same size. Check that the connectors are seated firmly and that the wiring is routed away from heat and moving parts. Keep a record of the tire size used during calibration, so the setting can be checked later. If the vehicle is later fitted with different wheels, compare the readings again before relying on them.
Specifications
| Brand | Hypertech |
|---|---|
| UPC | 759609049865 |
| Design | Inline |
| Tire size range | 28-40 in. |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and make sure your speedometer system and tire size match the device’s 28-40 in. range.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The factory-style connectors are intended to avoid splicing into existing wiring. Confirm that your tire size falls within the 28-40 in. range before installing.
What’s included
Includes factory-style connectors for installation without splicing.









