Overview
The Hypertech 730119 is an in-line speedometer calibrator module for Toyota vehicles. It corrects speedometer and odometer readings after tire or gear changes.
It supports all valid gear ratios and handles tire sizes down to 50 percent of stock, with no upper limit on tire size.
Key features
- Supports all valid rear-end gear ratios
- Tire size correction with a lower limit of 50% of stock tire size
- No upper limit on tire size
- In-line module format
Installing an in-line calibrator
An in-line calibrator sits in the speedometer signal line, so it is wired between the vehicle and the gauge. Before buying, look at the connectors and confirm they match your vehicle’s wiring. Most of the installation work is in routing and securing the module, so take the time to plan where it will sit.
Mount the module where it stays dry and clear of heat, moving parts and road debris. Leave enough slack in the harness for the connectors and keep the wires away from sharp edges. Once it is in place, check the speedometer and odometer against a known reference after any tire or gear change, because the module only corrects the readings it is set for.
- Confirm connector type and wiring before installing
- Mount clear of heat and moving parts
- Leave slack in the harness
- Re-check readings after a tire or gear change
Specifications
| Brand | Hypertech |
|---|---|
| Part number | 730119 |
| UPC | 759609049032 |
| Application | Toyota (per product title) |
| Gear ratios | All valid ratios supported |
| Tire size lower limit | 50% of stock tire size |
| Tire size upper limit | None stated |
Vehicle fitment
The module is sold for Toyota vehicles. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.








