Overview
The Smittybilt 2811 is a winch cradle that mounts into a 2 in. receiver hitch, giving a front or rear mounting option for a winch. Smittybilt designed it to accommodate most winches.
It is built from 3/16 in. and 1/4 in. cold rolled steel and finished in a two-stage satin black powder coat. A mounting plate for the roller fairlead is included, so the fairlead can be fixed to the cradle.
Key features
- Works with any 2 in. receiver hitch
- Front or rear installation
- Accommodates most winches
- Roller fairlead mounting plate included
Choosing a receiver mount
A receiver-mounted cradle transfers the winch load into the vehicle’s frame through the hitch, so the receiver and its mounting bolts matter as much as the cradle itself. Before buying any cradle, check the receiver’s size, its rating, and whether it bolts to the frame or only to the bumper area.
Steel cradles with a powder coat resist rust, but the coating can chip where the cradle rubs the receiver or where a strap passes. Touch up chips promptly and re-check the hitch pin and bolts after the first few trail runs. When a heavier winch is planned, confirm the cradle’s capacity and the winch’s mounting before fitting anything.
- Confirm the receiver size before ordering
- Inspect the powder coat for chips each season
- Re-tighten the hitch pin after rough trail use
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 2811 |
| UPC | 631410092233 |
| Product type | Winch cradle |
| Receiver size | 2 in. |
| Material | 3/16 in. and 1/4 in. cold rolled steel |
| Finish | Two-stage satin black powder coat |
Vehicle fitment
The cradle is sold as a universal fit because it works with any 2 in. receiver hitch. Confirm that the receiver on your vehicle is 2 in. before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the receiver is a 2 in. size and that your winch matches the cradle’s capacity before mounting. Install the roller fairlead plate on the cradle before placing the winch.
What’s included
The cradle includes the mounting plate for the roller fairlead. A winch isn’t included, and other mounting hardware isn’t itemized.
Not included: The winch.
























