Overview
The Smittybilt Roller Fairlead, part number 97281-47, guides wire rope onto the winch drum and reduces friction and wear on the cable.
It mounts directly to standard winch mounting plates and works with all standard winch plates.
The roller protects the rope during high angle pulls, when the cable runs steeply across the fairlead and wears faster than on a straight pull.
This is a recovery accessory rather than a vehicle part, so it is not tied to a vehicle year or model.
Key features
- Roller design reduces friction on the cable or wire rope
- Mounts directly to standard winch mounting plates
- Guides the rope onto the drum
- Reduces wear during high angle pulls
- Easy to install, per the manufacturer
Alignment and rope wear
A roller fairlead sits between the winch and the anchor point and sets the angle at which wire rope feeds onto the drum. Keeping the rope centered on the drum helps it spool evenly, which matters most when the winch is working under load. A roller reduces the drag a fixed fairlead creates, so the rope rolls across the guide instead of sliding over it.
Alignment is the step most owners overlook. A fairlead mounted off-center or at a poor angle can pinch the rope against the roller edge, and that causes the uneven wear the roller is meant to prevent. After mounting, run the winch slowly with a light load and watch how the cable lays on the drum. Re-check the mounting bolts after the first few uses, since trail vibration can loosen them.
- Inspect the roller for flat spots or grooves from the cable
- Look for frayed strands where the rope meets the roller
- Keep the roller clear of mud and grit
- Replace the rope if broken wires cluster in one area
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 97281-47 |
| UPC | 631410088489 |
| Type | Roller fairlead |
| Mounting | Standard winch mounting plates |
| Vehicle fitment | Not vehicle-specific |
Vehicle fitment
This fairlead is not vehicle-specific. It mounts to standard winch mounting plates, so match it to your winch’s plate pattern rather than to a vehicle.
Check your winch’s mounting plate before ordering.
Installation notes
The fairlead mounts directly to the standard winch plate.
What’s included
The roller fairlead, part 97281-47.




















