Select your vehicle

Smittybilt Low Profile 4-Way Roller Fairlead – 2810

Smittybilt

Shop Smittybilt Winch Fairlead on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Smittybilt low profile 4-way roller fairlead, model 2810
  • Fits most standard winch plates
  • Not for synthetic winch ropes

Description

Overview

The Smittybilt low profile 4-way roller fairlead, model 2810, guides wire rope onto the winch drum. Its rollers reduce friction and wear on the cable, which makes it useful during high angle pulls.

It mounts directly to a standard winch mounting plate. New mounting holes may need to be drilled, and all mounting hardware is included. It is for wire rope only and should not be used with synthetic winch ropes.

Key features

  • Low profile design
  • 4-way roller guide
  • Fits most standard winch plates
  • Reduces friction and wear on wire rope
  • All mounting hardware included

Guiding wire rope cleanly

A fairlead works best when the rope leads straight onto the drum without rubbing the housing. Rollers help the cable move smoothly, which reduces wear on the rope at the exit point. Keep the rope spooled evenly on the drum, since loose wraps can pinch against the rollers and cause damage.

Wire rope tends to wear where it bends most, so inspect the section that passes through the rollers regularly. Look for broken strands, kinks, and flattened spots, and replace the rope when damage appears. Clean out mud and grit from the rollers so they keep turning freely.

When you change winches or plates, check that the fairlead still lines up with the rope path before the first pull. Mounting hardware that is worn or loose should be replaced rather than reused.

  • Inspect rollers for free rotation
  • Look for broken wire rope strands
  • Keep the drum spooling even

Specifications

Brand Smittybilt
UPC 631410103304
Product type Roller fairlead
Roller type 4-way
Dimensions 12 inches x 4.25 inches
Top and bottom mounting holes 10 inches center to center
Center mounting hole 11 inches center to center
Rope type Wire rope only, not synthetic

Vehicle fitment

This fairlead is not tied to a specific vehicle. It fits most standard winch plates, so confirm your winch’s plate pattern matches the 10 and 11 inch hole spacing before buying.

Confirm the winch plate pattern before ordering.

Installation notes

New mounting holes may need to be drilled to fit your winch plate, so check the plate before installation. All mounting hardware is included with the fairlead.

SKU: S/B2810 Category:

Specification

Shipping weight 5.00 lbs
Package dimensions 8.00 × 5.00 × 5.00 in
brands

Questions & Answers

Can I use it with synthetic rope?

No. It is designed for wire rope only and should not be used with synthetic winch ropes. Use a wire cable with this fairlead.

Does it need drilling to mount?

New mounting holes may need to be drilled to fit your winch plate. Check the plate and its hole spacing against the fairlead before installing it, and have a drill and bits ready.

What mounting hardware comes with it?

All mounting hardware is included with the fairlead. The top and bottom holes are 10 inches center to center, and the center hole is 11 inches center to center.

How often should the rollers be cleaned?

Clean the rollers after muddy, sandy, or wet use, and check them at each service interval. Remove dirt with a brush and water, then confirm each roller turns freely by hand. Stiff or seized rollers should be repaired before the next pull, since they increase rope wear.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Smittybilt Winch Fairlead on Amazon