Overview
The Smittybilt aluminum hawse fairlead, model 2809, guides a synthetic winch rope to and from the drum. It is made for synthetic ropes, and it mounts on winches rated from 6,000 to 12,000 lbs using a 10 inch center bolt pattern.
A hawse fairlead is a fixed guide, so the rope runs through it on the way to and from the drum. This fairlead fits winches with 10 inch on-center mounting holes.
Key features
- Aluminum hawse fairlead
- Made for synthetic ropes
- 10 inch on-center mounting holes
- Mounts on 6,000 to 12,000 lb winches
Fairlead alignment and rope wear
A fairlead guides the rope so it leaves the drum at the right angle and does not rub against the winch frame. Misalignment causes the rope to wear on one side and can cause it to wind unevenly. Mounting the fairlead square with the drum and keeping the rope centered helps synthetic rope last.
Because a hawse fairlead is a fixed guide, the rope slides through it under load. Clean the guide surface and remove grit before each use, and check it for burrs or rough spots that could cut the rope. Tighten the mounting bolts after the first few uses, since vibration can loosen them.
- Check the guide for burrs and grit
- Keep the rope centered on the drum
- Re-tighten mounting bolts after first use
- Match the fairlead to the winch before buying
Specifications
| Brand | Smittybilt |
|---|---|
| UPC | 631410089363 |
| Product type | Hawse fairlead |
| Material | Aluminum |
| Rope type | Synthetic |
| Mounting pattern | 10 inch center bolt pattern |
| Winch rating | 6,000 to 12,000 lbs |
Vehicle fitment
This fairlead is not tied to a specific vehicle. It mounts on the winch, so match the winch’s bolt pattern and capacity to the 10 inch pattern and 6,000 to 12,000 lb range before buying.
Confirm the winch’s mounting pattern and capacity before ordering.
What’s included
The aluminum hawse fairlead.



















