Overview
The Skyjacker SE70F is a front spring bushing kit in red polyurethane, part number SE70F. It is non-greaseable and is intended for Skyjacker leaf springs only.
It is made for Skyjacker leaf springs only and does not fit OEM springs. Match the kit to your Skyjacker spring set before ordering.
Key features
- Front position
- Intended for Skyjacker leaf springs only
- Not for OEM springs
- Polyurethane construction
- Non-greaseable service type, red color
Before you install
Spring bushings sit where the leaf spring eye meets the shackle or hanger, and they absorb movement between the spring and the frame. Polyurethane bushings resist wear better than rubber in many off-road setups, but they transmit more vibration to the chassis. Because this kit is non-greaseable, its service life depends on keeping the spring pack clean and free of grit.
Before fitting, remove the old bushings and check the spring eyes and hangers for elongation, cracks, or wear marks. A worn eye can cause the new bushings to sit loose, so replace or repair the spring before installing. Use the correct press or driver so the bushing sleeves seat square.
- Inspect spring eyes for cracks and wear
- Check shackle and hanger bores for elongation
- Keep the bushing faces clean during fitting
- Re-check fasteners after the first few drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SE70F |
| UPC | 803696158679 |
| Position | Front |
| Material | Polyurethane |
| Service type | Non-greaseable |
| Color | Red |
| Compatible springs | Skyjacker leaf springs only |
| Fitment | Universal Fit (per description table) |
Vehicle fitment
No vehicle is confirmed for the SE70F, since it is made for Skyjacker leaf springs rather than a named vehicle. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front spring bushing kit, red.
Not included: Fitment for OEM leaf springs









